1 Scope
This standard specifies the requirements of scarf and shawl, and all the technical requirements such as test methods, inspection rules, marking, packaging, transportation and storage.
This standard is applicable to the scarf and shawl products with textile woven fabrics (silk fabrics are excluded) as the major raw materials.
2 Normative Reference
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending error in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies.
GB 250 Gray scale for assessing change in colour
GB/T 2910 Textile--Binary fibre mixtures--Quantitative chemical analysis
GB/T 2911 Textiles--Ternary fibre mixtures--Quantitative analysis
GB/T 2912.1 Textiles--Determination of Formaldehyde -- Part 1: Free and Hydrolized Formaldehyde (Water Extraction Method)
GB/T 3917.2 Textiles--Tear properties of fabrics--Part 2: Determination of tear force of tongue shaped test specimens
GB/T 3920 Textiles-Tests for colour fastness-Colour fastness to rubbing
GB/T 3921.1 Textiles--Tests for colour fastness--Colour fastness to washing: Test 1
GB/T 3921.3 Textiles--Tests for colour fastness to washing: Test 3
GB/T 3922 Textiles--Testing method for colour fastness to perspiration
GB/T 4841.6 Colour cards of standard depths for dyeing with dyestuffs 1/12
GB 5296. 4 Instructions for use of products of consumer interest--Instructions for use of textiles and apparel
GB/T 5711 Textiles-Tests for colour fastness-Colour fastness to dry cleaning
GB/T 5713 Textiles-Tests for colour fastness-Colour fastness to water
GB/T 7573 Textiles--Determination of pH of the aqueous extract
GB/T 8170 Rules for Rounding off of Numerical Values
GB/T 8427-1998 Textiles-Tests for colour fastness Colour fastness to artificial light: Xenon arc fading lamp test
GB/T 8628 Textiles-Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
GB/T 8629-2001 Textiles-Domestic washing and drying procedures for textile testing
GB/T 8630 Textiles-Determination of Dimensional Change in Washing and Drying
GB/T 14801 Test method for skewness and bow in woven and knitted fabrics
GB/T 17592.1 Textiles--Test method of the use of banned azo colourants--Gas chromatography/mass spectrography method
GB 18401-2003 National General Safety Technical Code for Textile Products
GB/T 18886 Textiles-Tests for Fastness-Colour Fastness to Saliva
FZ/T 01013 Textiles-determination of the dimensional change of dry cleaning of perchloroethylene
FZ/T 01026 Textile--Quaternary fibre mixtures--Quantitative chemical analysis
FZ/T 01053 Textiles-Designation of fiber content
FZ/T 01057(all parts) Test method for identification of textile fibres
FZ/T 80002 Marking, packaging transpiration and storage for garments
FZ/T 80004 Rule for garments delivery inspection
3 Requirements
3.1 Instructions for use
The instructions for use of finished products shall comply with the requirements of GB 5296.4 and GB 18401. Thereinto, the appearance physical dimension of the finished product shall be marked in cm.
3.2 Specification
3.2.1 The specification of finished product may be arranged by the enterprise itself according to the users' need, the content may include the type specification of the shell fabric selected, pattern design, physical dimension etc. The specification of finished products shall be subject to the design sheets confirmed by the both parties or the standard sample of physical product.
3.2.2 The allowable degree of size of finished product shall meet the requirements of Table 1.
