This standard specifies definitions, classification and grading requirements, technical requirements, test methods, inspection rules and marking, labeling and instructions, packaging, transportation, storage and installation of electronic tension fences.
This standard is applicable to the design, manufacture, installation and inspection of electronic tension fences.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 191-2008 Packaging - pictorial marking for handling of goods
GB/T 2423.1-2008 Environmental testing for electric and electronic products - Part 2: test methods - Tests A: cold
GB/T 2423.2-2008 Environmental testing for electric and electronic products - Part 2: test methods-Test B: high temperature
GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB 4208-2008 Degrees of protection provided by enclosure (IP code)
GB 10408.1-2000 Detectors for intruder alarm systems. Part 1: requirements for detectors - general
GB 12663-2001 General specifications for burglar-alarm control units
GB/T 15211-1994 Environmental testing for alarm systems
GB 16796-2009 Safety requirements and test methods for security alarm equipment
GB/T 17626.2-2006 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Electrostatic discharge immunity test
GB/T 17626.3-2006 Electromagnetic compatibility - Testing and measurement techniques - Radiated radio-frequency electromagnetic field immunity test
GB/T 17626.4-2008 Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient/burst immunity test
GB/T 17626.5-2008 Electromagnetic compatibility - Testing and measurement techniques - Surge immunity test
GB/T 17626.6-2008 Electromagnetic compatibility - Testing and measurement techniques - Immunity to conducted disturbances induced by radio-frequency fields
GB/T 17626.11-2008 Electromagnetic compatibility - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
