This standard specifies the methods of measurement applicable to sound and television receivers or associated equipment and specifies limits for the control of disturbance from such equipment.
For multifunction equipment which is subjected simultaneously to different clauses of this standard and/or other standards, details are given in 4.1.
This standard applies to the generation of electromagnetic energy from sound and television receivers for the reception of broadcast and similar transmissions and from associated equipment. The frequency range covered extends from 9 kHz to 400 GHz.
No measurements need be performed at frequencies where no limits are specified.
Receiving systems for collective reception, in particular cable distribution head ends (Community Antenna Television, CATV) and community reception systems (Master Antenna Television, MATV) are covered by GB 13836.
Broadcast receivers for digital signals are covered by Annex A and Annex B.
Information technology equipment (ITE) is excluded, even if intended to be connected to a television broadcast receiver.
The telecommunication port of broadcast receivers, intended to be connected to a telecommunication network, is covered by GB 5294.
In addition, measurements at the telecommunication port are performed with the broadcast reception functions, which are independent from the telecommunication function, disabled during the measurement.
PC tuner cards are measured according to the relevant clauses of this standard.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 3174 Specifications of PAL-D Television System
GB/T 4365 Electrotechnical Terminology — Electromagnetic Compatibility (GB/T 4365-2003, IEC 60050(161):1990, IDT)
GB 4824-2004 Industrial, Scientific and Medical (ISM) Radio-frequency Equipment — Electromagnetic Disturbance Characteristics — Limits and Methods of Measurement (IEC/CISPR 11:2003, IDT)
GB/T 6113.101 Specification for Radio Disturbance and Immunity Measuring Apparatus and Methods — Part 1-1: Radio Disturbance and Immunity Measuring Apparatus — Measuring Apparatus (GB/T 6113.101-2008, IEC/CISPR 16-1-1:2006, IDT)
GB/T 6113.102 Specification for Radio Disturbance and Immunity Measuring Apparatus and Methods — Part 1-2: Radio Disturbance and Immunity Measuring Apparatus — Ancillary Equipment — Conducted Disturbances (GB/T 6113.102-2008, IEC/CISPR 16-1-2:2006, IDT)
GB/T 6113.103 Specification for Radio Disturbance and Immunity Measuring Apparatus and Methods — Part 1-3: Radio Disturbance and Immunity Measuring Apparatus — Ancillary Equipment — Disturbances Power (GB/T 6113.103-2008, IEC/CISPR 16-1-3:2004, IDT)
GB/T 6113.104 Specification for Radio Disturbance and Immunity Measuring Apparatus and Methods — Part 1-4: Radio Disturbance and Immunity Measuring Apparatus — Ancillary Equipment — Radiated Disturbances (GB/T 6113.104-2008, IEC/CISPR 16-1-4:2005, IDT)
GB/T 6113.202 Specification for Radio Disturbance and Immunity Measuring Apparatus and Methods — Part 2-2: Methods of Measurement of Disturbances and Immunity — Measurement of Disturbance Power (GB/T 6113.202-2008, IEC/CISPR 16-2-2:2004, IDT)
GB/Z 6113.403 Specification for Radio Disturbance and Immunity Measuring Apparatus and Methods — Part 4-3: Uncertainties, Statistics and Limit Modelling — Statistical Considerations in the Determination of EMC Compliance of Mass-produced (GB/Z 6113.403-2007, IEC/CISPR 16-4-3:2004, IDT)
GB 9254 Information Technology Equipment — Radio Disturbance Characteristics — Limits and Methods of Measurement (GB 9254-2008, IEC/CISPR 22:2006, IDT)
GB 13836 Cabled Distribution Systems for Television and Sound Signals — Part 2: Electromagnetic Compatibility of Equipment (GB 13836-2000, IEC 60728-2:1997, NEQ)
GB/T 17309.1-1998 Methods of Measurement on Receivers for Television Broadcast Transmissions — Part 1: General Considerations Electrical Measurements at Radio and Video Frequencies and Measurements on Displays (idt IEC 60107-1:1995)
SJ/T 11348-2006 Methods of Measurement for Digital Television Flat Panel Displays
3 Terms, Definitions and Abbreviations
3.1 Terms and definitions
For the purposes of this document, the following terms, definitions and abbreviations apply.
3.1.1
sound broadcast receivers
appliances intended for the reception of sound broadcast and similar services for terrestrial, cable and satellite transmission, regardless whether the input signals are digital or analog
3.1.2
television receivers
appliances intended for the reception of television broadcast and similar services for terrestrial, cable and satellite transmissions, regardless whether the input signals are digital or analog
