This part of GB 15208 specifies the system classification, general technical requirements, test methods, inspection rules, packaging, marking, storage, transportation and accompanied technical documents of transmission cargo security inspection system.
This part is applicable to the design, manufacturing, assembling, acceptance and service of various transmission cargo security inspection systems.
Note: for the entrance of any inspection channel of this system, the maximum value of either height or width of the entrance section is greater than or equal to 0.91m while less than or equal to 2.41m.
This part is not applicable to X-ray security inspection system like computed tomography (CT), electron accelerator or X-ray generating device with energy greater than 500keV as well as vehicle security inspection system.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 15208.1-2018 Micro-dose X-ray security inspection system - Part 1: General technical requirements
GB 15208.2-2018 Micro-dose X-ray security inspection system - Part 2: Transmission baggage security inspection system
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB 15208.1-2018 and GB 15208.2-2018 and the following apply.
3.1
maximum load capacity
maximum weight of the object under inspection which can be dragged by the conveying device of system.
3.2
transmission cargo security inspection system
GB 15208.3-2018 The following standards are cited：
