This standard specifies the term and definition, storage conditions, storage requirements, preservation technology, safe operation, ex-warehousing and emergency treatment requirements for corrosive goods.
This standard is applicable to storage and preservation of goods defined in 3.1.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 6944-2012 Classification and code of dangerous goods
GB 15258 General rules for preparation of precautionary label for chemicals
GB 50016 Code for fire protection design of buildings
GB 50046 Standard for anticorrosion design of industrial constructions
3 Term and definition
For the purposes of this standard, the following term and definition apply.
3.1
corrosive goods
substances that will cause serious damage to biological tissues in contact with through chemical action, or that can seriously damage or even destroy other goods or delivery vehicles in case of leakage
Note: Rewritten from GB 6944-2012, Classification of dangerous goods, 4.9.1.
4 Storage conditions
4.1 Warehouse
4.1.1 The warehouse shall be cool, dry, ventilated and protected from light, and shall be subject to anti-corrosion and anti-seepage treatment. The warehouse building shall comply with the requirements of GB 50046.
4.1.2 The warehouses storing fuming nitric acid, bromine and perchloric acid shall be dry and ventilated. The requirements for fire resistance shall comply with GB 50016, and the fire resistance rating shall not be lower than Grade II.
