This standard specifies the requirements for the site selection, technology, feeding wastes, operation, emission control, monitoring, implementation and supervision of municipal solid waste incineration plant.
This standard is applicable to the design, environmental impact assessment and final acceptance of municipal solid waste incineration plants as well as the pollution control and monitoring & management during operation of such plants.
This standard applies as a reference for the industrial furnaces of which municipal solid wastes mass accounts for more than 30% of the total mass of materials put into furnace as well as special incineration furnaces for sludge from domestic sewage treatment facilities and for non-hazardous industrial solid wastes.
This standard is applicable to the pollutant emission behaviors allowed by law; the site selection of new pollution sources and the control on existing pollution sources within special monitoring zones shall be conducted according to relevant provisions of laws, regulations and rules such as "Law on Prevention of Air Pollution of the People's Republic of China", "Law of the People's Republic of China on Prevention and Control of Water Pollution", "Marine Environment Protection Law of the People's Republic of China", "Law of the People's Republic of China on Prevention of Environmental Pollution Caused by Solid Waste", "Law of the People's Republic of China on Prevention and Control of Radioactive Pollution", "Law of the People' s Republic of China on Environmental Impact Assessment", "Urban and Rural Planning Law of the People's Republic of China", and "The Law of Land Administration of the People's Republic of China".
2 Normative References
This standard refers to the provisions of the following documents. For undated references, the latest edition applies.
GB 8978 "Integrated Wastewater Discharge Standard"
GB 14554 "Emission Standards for Odor Pollutants"
GB 16889 "Standard for Pollution Control on the Landfill Site of Municipal Solid Waste"
GB 30485 "Standard for the Pollution Control on Cooperative Disposal Solid Waste of Cement Kiln"
GB/T 16157 "The Determination of Particulates and Sampling Methods of Gaseous Pollutants Emitted from Exhaust Gas of Stationary Source"
HJ 77.2 "Ambient Air and Waste Gas Determination of Polychlorinated Dibenzo-p-dioxins(PCDDs)and Polychlorinated Dibenzofurans (PCDFs)"
HJ 543 "Measurement of the Exhaust Mercury of Stationary Source Cold Atomic Absorption Spectrophotometry (Provisional)"
HJ 548 "Stationary Source Emission - Determination of Hydrogen Chloride - Silver Nitrate Volumetric Method (Provisional)"
HJ 549 "Determination of Hydrogen Chloride in Ambient Air and Exhaust Gas-Ion Chromatography Method (Provisional)"
HJ 629 "Determination of Sulphur Dioxide from Exhausted Gas of Stationary Source Nondispersive Infrared Absorption Method"
HJ 657 "Ambient Air and Stationary Source Emission - Determination of Metals in Ambient Particulate Matter - Inductively Coupled Plasma/Mass Spectrometry (ICP-MS)"
HJ 693 "Determination of Sulphur Dioxide from Exhausted Gas of Stationary Source Fixed - Potential Electrolysis Method"
HJ/T 20 "Technical Specifications on Sampling and Sample Preparation from Industry Solid Waste"
HJ/T 27 "Stationary Source Emission - Determination of Hydrogen Chloride - Mercuric Thiocyanate Spectrophotometric Method"
HJ/T 42 "Stationary Source Emission - Determination of Nitrogen Oxide - Ultraviolet Spectrophotometric Method"
HJ/T 43 "Stationary Source Emission - Determination of Nitrogen Oxide C N (1-naphtye) - Ethylenediamine Dihydrochloride Spectrophotometric Method"
HJ/T 44 "Stationary Source Emission - Determination of Carbon Monoxide - Non-dispersive Infrared Absorption Method"
HJ/T 56 "Determination of Sulphur Dioxide from Exhausted Gas of Stationary Source Iodine Titration Method"
