GB 19044-2013 Minimum allowable values of energy efficiency and the energy efficiency grades of self-ballasted fluorescent lamps for general lighting service
This Standard specifies the energy efficiency grade, allowable values of energy efficiency, evaluating values of energy conservation and test methods of the self-ballasted fluorescent lamps for general lighting service (hereinafter referred to as "self-ballasted fluorescent lamps").
This Standard applies to those self-ballasted fluorescent lamps with such features: rated voltage: 220V; AC supply at frequency of 50Hz; rated power: 3~60W, with screw holder or bayonet holder, for general lighting service at household or other similar occasions; an integration of starting control parts and burning point stabilization parts.
This Standard does not apply to the self-ballasted fluorescent lamps with covers.
2 Normative References
The following documents are indispensable for the application of this Document. For dated reference, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendment) applies.
GB16844 Self-ballasted Lamps for General Lighting Services - Safety Requirements
GB/T17263 Self-ballasted Lamps for General Lighting Service - Performance Requirements
3 Terms and Definitions
For the purposes of this Standard, the terms and definitions defined in GB/T 17263 and the following ones apply.
3.1
Initial luminous efficacy for self-ballasted fluorescent lamps
The ratio of actually measured initial luminous flux to the power of self-ballasted fluorescent lamp under the testing condition specified in the Standard.
3.2
Minimum allowable values of energy efficiency for self-ballasted fluorescent lamps
The minimum standard value that the initial luminous efficacy for self-ballasted fluorescent lamps shall reach under the testing condition specified in the Standard.
3.3
Evaluating values of energy conservation for self-ballasted fluorescent lamps
The minimum standard value that the energy-saving initial luminous efficacy for self-ballasted fluorescent lamps shall reach under the testing condition specified in the Standard.
