This part of GB 25115 covers, together with GB 25115-1 give the most significant hazards associated with air dryers, and in particular with tumble dryers having a net usable cage volume > 160L and tunnel finishers including associated conveyors and cabinet dryers.
This part complements the basic requirements as laid down in GB/T 15706.1 and GB/T 15706.2. It also gives guidance to the designer on assessing the risks associated with the hazards (see EN 1050) and on selecting measures for attaining the required safety level.
This part does not apply to ancillary equipment.
2 Normative references
The following normative documents contain provisions which, through reference of GB 25115, constitute provisions of this part. For dated references, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest editions apply to this part.
GB 4706.1 Household and similar electrical appliances - Safety- Part 1: General Requirements [GB 4706.1-2005, IEC 60335-1:2004 (Ed4.1), IDT]
GB 4706.20 Household and similar electrical appliances - Safety - Particular requirements for tumble dryers (GB 4706.20-2004, IEC 60335-2-11:2002, IDT)
GB 5226.1-2008 Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements (IEC 60204-1:2005, IDT)
GB 12265.2 Safety of machinery - safety distances to prevent danger zones being reached by the lower limbs
GB/T 15706.1 Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology methodology (GB/T 15706.1-2007, ISO 12100-1:2003, IDT)
GB/T 15706.2 Safety of machinery-Basic concepts general principles for design - Part 2: Technical principles (GB/T 15706.2-2007, ISO 12100-2:2003, IDT)
GB/T 16855.1-2008 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006, IDT)
