This standard specifies safety requirements and measures for design, manufacture and use of hydraulic press for metal cold working.
This standard is applicable to the hydraulic press for metal cold working, that for machining other sheet materials (e.g. paperboard, plastics, rubber and leather) and metal powder, and also applicable to ancillary device connected with the hydraulic press. This standard does not apply to the machinery for the following purposes:
a) Metal plates shearing, e.g. plate shearing machine;
b) Fastening and connection, e.g. riveting;
c) Bending or twisting, e.g. pipe bender, bending machine;
d) Straightening or aligning, e.g. manual straightening hydraulic press;
e) Movable or swiveling head stroking, e.g. turret press, movable head press or movable press;
f) Extrusion, e.g. horizontal profiles extruder;
g) Forge hammer, free forging press;
h) Specific shaping of metal powders, e.g. ultra-high-voltage hydrostatic press;
i) The machinery designed only for punching use, e.g. punching machine for structural members.
2 Normative References
The following documents are indispensable for the application of this standard. For dated references, only the dated edition is applicable to this document. For undated references, the latest editions of the normative documents (including all the amendments) are applicable to this document.
GB/T 1251.2 Ergonomics-Visual Danger Signals -General Requirements, Design and Testing (ISO 11428)
GB/T 2893.2 Graphical Symbols - Safety Colours and Safety Signs - Part 2: Design Principles for Product Safety Labels(ISO 3864-2)
GB 2894 Safety Signs and Guideline for the Use
GB/T 3766-2001 Hydraulic Fluid Power - General Rules Relating to Systems(ISO 4413:1998)
GB 4584 Specification of Active Opto-Electronic Protective Devices for Presses
GB 5226.1-2008 Electrical Safety of Machinery - Electrical Equipment of Machines - Part 1: General Requirements(IEC 60204-1:2005)
GB/T 7932-2003 Pneumatic Fluid Power - General Rules Relating to Systems (ISO 4414:1998)
GB/T 8196-2003 Safety of Machinery - Guards - General Requirements for the Design and Construction of Fixed and Movable Guards (ISO 14120:2002)
GB 12265.3-1997 Safety of Machinery - Minimum Gaps to Avoid Crushing of Parts of the Human Body(EN 349:1993)
GB/T 15706.1-2007 Safety of Machinery - Basic Concepts, General Principles for Design - Part 1: Basic Terminology Methodology(ISO 12100-1:2003)
GB/T 15706.2-2007 Safety of Machinery - Basic Concepts and General Principles for Design - Part 2: Technical Principles(ISO 12100-2:2003)
GB 16754-2008 Safety of Machinery - Emergency Stop - Principles for Design (ISO 13850:2006)
GB/T 16855.1-2008 Safety of Machinery - Safety-related Parts of Control Systems - Part 1: General Principles for Design (ISO 13849-1:2006)
GB/T 16856.1 Safety of Machinery - Risk Assessment - Part 1: Principles(ISO 14121-1)
GB 17120 Metalforming Machinery - Safety Requirements
GB 17888.1 Safety of Machinery - Permanent Means of Access to Machinery - Part 1: Choice of a Fixed Means of Access Between Two Levels(ISO 14122-1)
GB 17888.2 Safety of Machinery - Permanent Means of Access to Machinery - Part 2: Working Platforms and Walkways (ISO 14122-2)
GB 17888.3 Safety of Machinery - Permanent Means of Access to Machinery - Part 3: Stairways, Stepladders and Guardrails (ISO 14122-3)
GB 17888.4 Safety of Machinery - Permanent Means of Access to Machinery - Part 4: Fixed Ladders(ISO 14122-4)
GB/T 18153 Safety of Machinery -Temperatures of Touchable Surfaces -Ergonomics Data to Establish Temperature Limit Values for Hot Surfaces (EN 563)
GB 18209.2 Electrical Safety of Machinery - Indication, Marking and Actuation - Part 2: Requirements for Marking(IEC 61310-2)
GB/T 18831-2010 Safety of Machinery - Interlocking Devices Associated with Guards - Principles for Design and Selection (ISO 14119:1998+Amd.1:2007)
GB/T 19671-2005 Safety of Machinery - Two-Hand Control Devices - Functional Aspects and Design Principles(ISO 13851:2002)
GB/T 19876-2005 Safety of Machinery-Positioning of Protective Equipment with Respect to the Approach Speeds of Parts of the Human Body(ISO 13855:2002)
GB 23821-2009 Safety of Machinery - Safety Distances to Prevent Danger Zones Being Reached by Upper and Lower Limbs (ISO 13857:2008)
JB 9967 Hydraulic Presses - Noise Limits
3 Terms and Definitions
For the purposes of this document, the following terms and definitions and those established in GB/T 15706.1, GB/T 15706.2 and GB 17120 apply.
3.1
Ancillary device
It refers to the device used together with hydraulic press or integrated with hydraulic press, e.g. lubrication device, feeder and ejector.