1 Scope
This Part specifies the requirements, test methods, inspection rules, marking, packaging, transportation and storage as well as the contract contents of thermal barrier architectural aluminum alloy profiles.
This Part is applicable to the thermal barrier architectural aluminum alloy profiles which are composited by the insertion methodology or poured and debridged methodology.
The thermal barrier aluminium alloy profiles used for other industries may be implemented by reference to this Part.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this Part. For dated reference, subsequent amendments (excluding corrected details) to, or revisions of, any of these publications do not apply. However, the parties to agreements based on this Part are encouraged to investigate the possibility of applying the latest editions of the documents indicated below. For undated references, the latest edition of the normative document is applicable to this Part.
GB/T 3199 Wrought Aluminium and Aluminium Alloy Products-Packing, Marking, Transporting and Storing"
GB 5237.1-2004 "Wrought Aluminium Alloy Extruded Profiles for Architecture--Part 1: Mill finish profiles"
GB 5237.2-2004 "Wrought Aluminium Alloy Extruded Profiles for Architecture--Part 2: Anodized colored profiles"
GB 5237.3-2004 "Wrought Aluminium Alloy Extruded Profiles for Architecture--Part 3: Electrophoretic coating profiles"
GB 5237.4-2004 "Wrought Aluminium Alloy Extruded Profiles for Architecture--Part 4: Powder coating profiles"
GB 5237.5-2004 "Wrought Aluminium Alloy Extruded Profiles for Architecture--Part 5: PVDF coating profiles"
GB/T 6682 Water for Analytical Laboratory Use-Specification and Test Methods
YS/T 436 Atlas of Wrought Aluminium Alloy Extruded Profile for Architecture
YS/T 459-2003 Wrought aluminium alloy profiles for architecture with combined coatings of anodic oxide and colorated organic c
