Standard No.:	GB/T 11798.6-2001
Chinese Name:	机动车安全检测设备 检定技术条件 第6部分：对称光前照灯检测仪检定技术条件
English Name:	Motor vehicle safety testing equipment-Technical requirements of verification-Part 6:Technical requirements of veification for symmetrical beam headlamp tester
Professional Classification:	R82 Vehicle management
Professional Classification:	GB National Standard
ICS Classification:	43.020 43.180
Issued by:
Issued on:	2001-04-29
Implemented on:	2001-12-01
Status:
Language:	English
File Format:	PDF
Word Count:	4500 words
Price(USD):	135 (USD)
Delivery:	via email in 1-3 business day

1 Scope

This standard specifies the technical requirements and relevant methods of verification for symmetrical beam headlamp tester (hereinafter referred to as “headlamp tester”). This standard is applicable to the verification of the headlamp

tester used in the safety detection of motor vehicle.

2 Normative References

The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. At time of publication, the editions indicated were valid. All the standards will be revised; all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of the following standards are applicable.
GB/T 5337-1985 Terminologies of electrical device, luminaries, and instruments of motor vehicles
GB 4599-1994 The light distribution performance of motor vehicles headlight
GB/T 6587.7-1986 Basic safety tests for electronic measuring instruments
3 Definition For the purposes of this standard, the following definitions are applied.
3.1 Optical Axle Angle
The included angle of vertical surface with the optic axial of upper beam coincident to the reference line.
3.2 Measurement Distance
The vertical dimension from the fiducial center of headlamp to the photic mirror plane of the headlamp tester.
3.3 Optics Centre Axle
The axis is the line that the pivot (or the optical center point specified of headlamp manufacturer) of the photic mirror plane of headlamp tester vertical to the mirror plane.
3.4 Other definitions are based on the requirements of Chapter 6 in GB/T
5337-1985 and Chapter 1 in GB 4599-1994.

4 Technical Requirements4.1 Appearance and General Requirements4.1.1

The headlamp tester shall have clear nameplate, indicating the name , the model, and the factory number of the equipment.
4.1.2 Various controls such as switch, button, socket and wiring terminal shall have explicit text or symbol marking. The symbol marking shall meet the requirements of relevant standards. The controls shall be in flexible and reliable operation, and shall not have phenomenon such as being loose or being clamped.