1 Scope
This standard specifies the characteristics of parallel pins with internal thread of unhardened steel and austenitic stainless steel with nominal diameters d=6~50mm, tolerance is m6.
2.Normative Reference
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. At time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below.
GB/T 90-1985 Acceptance inspection,marking and packaging of fasteners (EQV ISO 3269:1984)
GB/T 197-1981 General purpose screw threads--Tolerances and fits for diameter from 1 to 355mm
GB/T 1237-2000 Designation system for fasteners (EQV ISO 8991:1986)
GB/T 3098.6-2000 Mechanical properties of corrosion-resistant stainless-steel fasteners-Part 1:Bolts,screws and studs (IDT ISO 3506-1:1997)
GB/T 5267-1985 Electroplated coatings on threaded fasteners
GB/T 11376-1997 Phosphate conversion coatings for metals (EQV ISO 9717:1990)
GB/T 120.1-2000 The following standards are cited: