This standard specifies the methods, technical requirements and inspection rules for damp-heat testing of rotating electrical machine for service in general environmental condition.
This standard is applicable to various rotating electrical machines (excluding micro-control electrical machine, hereafter referred to as electrical machine).
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 755 Rotating Electrical Machines C Rating and Performance
GB/T 2423.3-2006 Environmental Testing for Electric and Electronic Products - Part 2: Testing Method Test Cab: Damp Heat Steady State
GB/T 2423.4-2008 Environmental Testing for Electric and Electronic Products - Part 2: Test Method - Test Db: Damp Heat, Cyclic (12h+12h Cycle)
GB/T 12113-2003 Methods of Measurement of Touch Current and Protective Conductor Current
3 Technical Requirements
3.1 Insulation resistance
3.1.1 The insulation resistance value between complete electrical machine winding against enclosure and that between windings shall not be less than the following values:
a) For the electrical machine with rated voltage of 220V or above, it shall be determined according to Formula (1):
GB/T 12665-2017 The following standards are cited: