This Standard specifies the sectional dimension, effective length and permissible deviation, ride-out, variable center distance dimension measurement method and belt pulley dimension of automotive V-belt (hereinafter referred to as V-belt).
This standard is applicable to belts and pulleys used for driving auxiliaries of internal combustion engines for the automotive industry.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative documents referred to applies.
GB/T 13490 V-belts — Uniformity of Belts — Test Method for Determination of Centre Distance Variation (GB/T 13490-2006, ISO 9608:1994, IDT)
GB/T 17516.1 Belt Drives — Dynamic Test to Determine Pitch Zone Location — Part 1: V-beltsV (GB/T 17556.1-1998, idt ISO 8370:1993)
ISO 1081 Belt drives — V-belts and V-ribbed Belts, and Corresponding Grooved Pulleys — Vocabulary
下列文件中的条款通过本标准的引用而成为本标准的条款,凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T13490 V 带 带的均匀性 中心距变化量的测定方法(GB/T13490-2006,ISO9608:1994,IDT)
GB/T17516.1 V 带和多楔带传动 测定节面位置的动态试验方法 第1 部分:V 带(GB/T17556.1-1998,idtISO8370:1993)
ISO1081 带传动 V 带和多楔带及其轮槽 术语
GB/T 13352-2008 The following standards are cited：
