This standard specifies the maintenance and supervision of mineral turbine oil used for lubrication and speed regulation of turbine, water turbine and gas turbine systems in power plants. It may also be referred to for maintenance and supervision of mineral turbine oil used for auxiliary equipment such as phase modifier and feed pump.
This standard is applicable to the maintenance and supervision of mineral turbine oil used for lubrication and speed regulation of turbine, water turbine and gas turbine systems in power plants.
This standard is not applicable to a variety of non-mineral synthetic fluids used for lubrication and speed regulation of turbine.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 264 Petroleum products—Determination of acid number
GB/T 265 Petroleum products—Determination of kinematic viscosity and calculation of dynamic viscosity
GB/T 267 Petroleum products—Determination of flash and fire points—Open cup
GB/T 3536 Petroleum products—Determination of flash and fire points—Cleveland open cup method
GB/T 7596 Quality criteria of turbine oils in service for power plants
GB/T 7597 Method of sampling for transformer and turbine oils in electric power industry
GB/T 7600 Determination of water content in transformer oils in service by coulometric method
GB/T 7602.1 Determination of T501 oxidation inhibitor content in transformer oil or turbine oil—Part 1: Spectrophotometric method
GB/T 7605 Determination of clemulsibility characteristics of turbine oils in service
GB/T 8926 Standard test method for insolubles in used lubricating oils
GB 11120 Lubricating oils for turbines
GB/T 11143 Standard test method for rust-preventing characteristics of inhibited mineral oil in the presence of water
GB/T 12579 Determination of foaming characteristics of lubricating oils
DL/T 429.1 Determination of transparency of electric power oils
DL/T 429.6 Determination of open cup ageing of power oils
DL/T 429.7 Determination of sludge for electric power oils
DL/T 432 Determination of particulate contamination in oil
SH/T 0168 Petroleum products—Determination of chromaticity
SH/T 0193 Lubricating oils—Determination of oxidation stability—Rotating pressure vessel method
SH/T 0308 Determination method for air release value of lubricating oil
SAE AS4059F Aerospace fluid power—Contamination classification for hydraulic fluid
ASTM D6971 Standard test method for measurement of hindered phenolic and aromatic amine antioxidant content in non-zinc turbine oils by linear sweep voltammetry
3 Properties of turbine oil
GB/T 14541-2017 The following standards are cited: