This standard specifies the classification, requirements, test methods, inspection rules, marking, packaging, transport and storage of the surface decorated fiberboard and particleboard with paper impregnated thermosetting resins.
This standard is applicable to surface decorated fiberboard and particleboard with paper impregnated thermosetting resins for indoor.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 11718-2009 Medium density fiberboard
GB/T 17657-2013 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels
GB/T 18259-2009 Terms of wood-based panel and its surface decoration
GB 18580 Indoor decorating and refurbishing materials - Limit of formaldehyde emission of woodbased panels and finishing Products
GB/T 19367 Wood-based panels-determination of dimensions of panels
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 18259-2009 and the following apply. For the convenience of application, some terms and definitions in GB/T 18259-2009 are listed below.
3.1
surface decorated fiberboard and particleboard with paper impregnated thermosetting resins
decorative slab with fiberboard and particleboard as substrate and paper impregnated thermosetting resins as facing materials
3.2
frosting mark
opaque white spots on the product surface, also known as white mark
Note: it is revised from the definition 2.2.4.59 in GB/T 18259-2009.
GB/T 15102-2017 The following standards are cited：
