This part of GB/T 16508 specifies the installation requirements of stationary shell boiler.
This part is applicable to the shell boilers defined within the scope of GB/T 16508.1.
2 Normative References
The following documents for the application of this document are essential. Any dated reference, just dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1576 Water Quality for Industrial Boilers
GB/T 2900.48 Electrotechnical Terminology of Boilers
GB/T 10180 Thermal Performance Test Code for Industrial Boilers
GB/T 16508.1 Shell Boilers - Part 1: General Requirements
GB/T 16508.4 Shell Boilers - Part 4: Fabrication, Inspection and Acceptance
GB/T 16508.5 Shell Boilers - Part 5: Safety Appurtenances and Instruments
GB 50211 Code for Construction and Acceptance of Industrial Furnaces Building
GB 50231 General Code for Construction and Acceptance of Mechanical Equipment Installation Engineering
GB 50264 Design Code for Insulation Engineering of Industrial Equipment and Pipe
GB 50273 Code for Construction and Acceptance of Boiler Installation Engineering
TSG G000 Boiler Safety Technical Supervision Administration Regulation
TSG G3001 Boiler Installation and Alteration Enterprises Supervision Administration Regulation
3 Terminologies and Definitions
For the purposes of this document, the terminologies and definitions defined in GB/T 2900.48 as well as the following ones apply.
3.1
Boiler setting
Outer wall of boiler constructed or laid with refractory material, thermal insulation material, etc.
3.2
Drying-out
Process for drying the boiler setting at certain temperature rise speed and with certain holding time by igniting or other heating methods.
3.3
Boiling-out