Standard No.:	GB/T 17213.7-2017
Chinese Name:	工业过程控制阀 第7部分：控制阀数据单
English Name:	Industrial-process control valves—Part 7:Control valve data sheet
Professional Classification:	N16 Actuator
ICS Classification:	23.060.40 Pressure regulators
Issued by:
Issued on:
Implemented on:	2018-07-01
Status:	VALID
Replace:	GB/T17213.7-1998 Industrial-process control valves Part 7:Control valve data sheet
Language:	English
File Format:	PDF
Word Count:	10000 words
Price(USD):	300 (USD)
Delivery:	via email in 1-3 business day

1 Scope

This part of the GB/T 17213 series provides a list of requirements that are normally necessary for the procurement of the majority of control valves for process systems. No attempt is made to include all possible requirements for any conceivable process.

The list in this part is arranged in a format designed to assist the specification writer with a standardized presentation of data and also to be a basis for use with data processing facilities.

A detailed set of instructions is included in this part, in order to ensure that the abbreviated terms are fully understood and that consistent data entries are always made.

2 Normative References

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 4208-2008 Degrees of Protection Provided by Enclosure (IP Code) (IEC 60529: 2001, IDT)
GB/T 17213.1-2015 Industrial-process Control Valves — Part 1: Control Valve Terminology and General Considerations (IEC 60534-1:2005, IDT)
GB/T 17213.2-2017 Industrial-process Control Valves — Part 2-1: Flow Capacity — Sizing Equations for Fluid Flow under Installed Conditions (IEC 60534-2-1:2011, IDT)
GB/T 17213.3-2005 Industrial-process Control Valves — Part 3-1: Dimensions — Face-to-face Dimensions for Flanged, Two-way, Globe-type, Straight Pattern and Center-to-face Dimensions for Flanged, Two-way, Globe-type, Angle Pattern Control Valves (IEC 60534-3-1:2000, IDT)
GB/T 17213.4-2015 Industrial-process Control Valves — Part 4: Inspection and Routine Testing (IEC 60534-4:2006, IDT)
GB/T 17213.5-2008 Industrial-process Control Valves — Part 5: Marking (IEC 60534-5:2004, MOD)
GB/T 17213.8-2015 Industrial-process Control Valves — Part 8-1: Noise Considerations — Laboratory Measurement of Noise Generated by Aerodynamic Flow through Control Valves (IEC 60534-8-1:2005, IDT)
GB/T 17213.10-2015 Industrial-process Control Valves — Part 2-4: Flow Capacity — Inherent Flow Characteristics and Rangeability (IEC 60534-2-4:2009, IDT)
GB/T 17213.11-2005 Industrial-process Control Valves — Part 3-2: Dimensions — Face to Face Dimensions for Rotary Control Valves Except Butterfly Valves (IEC 60534-3-2:2001, IDT)
GB/T 17213.12-2005 Industrial-process Control Valves — Part 3-3: Dimensions — End-to-end Dimensions for Buttweld, Two-way, Globe-type, Straight Pattern Control Valves (IEC 60534-3-3:1998, IDT)