This standard specifies dimensional codes of commercial road vehicles for the exchange and electronic processing of vehicle data .
It applies to commercial road vehicles as defined in ISO 3833:1997.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below.
GB/T 3730.2-1996(idt ISO 1176:1990) “Road Vehicle-Masses-Vocabulary and Codes”
GB/T 3730.3-1992(idt ISO 612:1978) “Motor Vehicles and Towed Vehicles-Dimensions of Vehicles Terms and Definitions”
GB/T 11563-1995(eqv ISO 6549:1980) “Motor Vehicles C Procedure for H-point Determination”
GB/T 17346-1998(idt ISO 3409:1975) “Passenger Cars--Lateral Spacing of Foot Controls”
ISO 3832:1991 “Passenger Cars C Luggage Compartments C Method of Measuring Reference Volume
ISO 3833:1977 “Road Vehicles C Types C Terms and Definitions”
ISO 4130:1978 “Road Vehicles C Three-dimensional Reference System and Fiducial Marks C Definitions”
ISO 4131:1979 “Road Vehicles C Dimensional Codes for Passenger Cars”
3 Definitions
For the purposes of this standard, the definitions given in ISO 4130 and ISO 4131 and the following definitions apply.
3.1 Daylight opening
Maximum unobstructed opening through any glass aperture, including reveal or garnish-mouldings adjoining the glass, according to a given direction or projection
If not specified, the dimension is the horizontal projection.
3.2 Commercial road vehicle
A motor vehicle which on account of its design and appointment is used mainly for conveying goods may also tow a trailer.
GB/T 17347-1998 The following standards are cited：
