This standard specifies the general rules, technical requirements, inspection, testing and test requirements, accompanying documents, marking, packaging, transportation and storage requirements for merry-go-round type of rides.
This standard is applicable to the merry-go-round type of rides.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 191 Packaging — Pictorial Marking for Handling of Goods
GB 8408 Large-scale Amusement Device Safety Code
GB/T 8923 (all parts) Preparation of Steel Substrates before Application of Paints and Related Products — Visual Assessment of Surface Cleanliness
GB/T 9286-1998 Paints and Varnishes — Cross Cut Test for Films
GB/T 13384 General Specifications for Packing of Mechanical and Electrical Product
GB/T 13912 Metallic Coatings — Hot Dip Galvanized Coatings on Fabricated Iron and Steel Articles — Specifications and Test Methods
GB/T 16855.1 Safety of Machinery — Safety-related Parts of Control Systems — Part 1: General Principles for Design
GB/T 20306 Amusement Devices Terminology
GB/T 20438 (all parts) Functional Safety of Electrical/Electronic/Programmable Electronic Safety-related Systems
GB/T 34370 (all parts) Nondestructive Testing of Amusement Equipments
GB/T 34371 Risk Assessment for Amusement Ride — General Principles
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in GB/T 20306 and the following apply.
3.1
merry-go-round series
merry-go-round type of rides with the turning table of the equipment rotates around the central vertical column, and the ride system is installed on the turning table and ups and downs along with a certain stroke
3.2
rotating cup series
merry-go-round type of rides with the turning table of the equipment rotates around the central vertical column at a fixed angle, and the ride system is installed on the turning table to spin
3.3
rotating express series
merry-go-round type of rides with the ride system of the equipment rotates around the central vertical column and along the ups and downs of the track
3.4
other merry-go-round series
merry-go-round type of rides with the ride system of the equipment rotates around the central vertical column and is accompanied by other forms of movement, but it does not belong to those as defined in 3.1, 3.2 and 3.3
3.5
fail-safe
a mode of avoiding larger failures or accidents in which the control system or mechanical mechanism system of the equipment is able to maintain or transfer to a safe state after a failure of the equipment.
GB/T 18158-2019 The following standards are cited：
