1 Scope
This standard specifies the general technical specifications and technical requirements of amusement rides bumper car category
This standard is applicable to the design, manufacturing, installation, reconstruction, maintenance, test, inspection and usage management of amusement rides bumper car category (hereinafter referred to as bumper car).
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document is applicable to this standard.
GB/T 528 Rubber, Vulcamized or Thermoplastic--Determination of Tensile Stress-strain Properties (GB/T 528—1998, eqv ISO 37: 1994)
GB/T 529 Rubber Vulcanized or Thermoplastic - Determination of Tear Strength (Trouser, Angle and Crescent Test Pieces) (GB/T 529—1999, eqv ISO 34-1:1994)
GB/T 531 Rubber-Determination of Indentation Hardness by Means of Pocket Hardness Meters (GB/T 531—1999, idt ISO 7619:1986)
GB/T 532 Rubber Vulcanized or Thermoplastic - Determination of Adhesion to Textile Fabric (GB/T 532—1997, idt ISO 36: 1993)
GB/T 699 Quality Carbon Structural Steels
GB/T 1447 Fiber-reinforced Plastics Composites-Determination of Tensile Properties
GB/T 1449 Fiber-reinforced Plastic Composites-Determination of Flexural Properties
GB/T 1451—1983 Fiber-reinforced Plastics Composites-Determination of Charpy Impact Properties
GB/T 1689 Rubber Vulcanized—Determination of Abrasion Resistance (Akron Machine)
GB/T 2828.1 Sampling procedures for inspection by attributes-Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection (GB/T 2828.1—2003, ISO 2859-1: 1999, IDT)
GB/T 3077 Alloy Structure Steels
GB 4706.1—2005 "Household and Similar Electrical Appliances-Safety-Part 1: General Requirements" (IEC 60335-1: 2004(Ed4.1), IDT)
GB/T 7403.1 Lead-acid Traction BatteriesDPart 1; General Requirements and Methods of Test (GB/T 7403.1—2008, IEC 60254-1: 2005, MOD)
GB 8408—2008 Amusement Device Safety Code
GR 11211 Intensity - Determination of Vulcanized Rubber and Metallic Binding-Stretch Method (GB 11211—1989, eqv ISO 814: 1986)
3 General Provisions
3.1 Bumper cars refer to those amusement rides driven by electricity, combustor combustion motor and manpower, which operate in fixed car yard and which can be impacted by other bumper cars.
3.2 The design, manufacturing, installation, reconstruction, maintenance, test and usage management of bumper cars shall meet those requirements stated in this standard and GB 8408 - 2008.
3.3 The design, manufacture, installation and usage of battery car shall guarantee the personal safety.
3.4 All those requirements not mentioned in this standard shall be implemented according to relevant national standards, regulations and codes.