This standard provides rules for the designation of terminals of objects within a system.
The principles laid down are primarily intended for use in the electrotechnical and related areas, but are general and applicable to all technical areas. They can be used for systems based on different technologies or for systems combining several technologies.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All normative documents are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below.
GB/T 4026-1992 Dentification of Electric Equipment Terminals and of Terminations of Certain Designated Conductors, Including General Rules for an Alphanumeric System (eqv IEC 60445:1988)
GB/T 6988.1-1997 Preparation of Documents Used in Electrotechnology — Part 1: General Requirements (idt IEC 61082-1:1991)
GB/T 6988.2-1997 Preparation of Documents Used in Electrotechnology — Part 2: Function-oriented Diagrams (idt IEC 61082-2:1993)
GB/T 6988.3-1997 Preparation of Documents Used in Electrotechnology — Part 3: Connection Diagrams, Tables and Lists (idt IEC 61082-3:1993)
GB/T 13534-1992 Codes for Designation of Colours for Electricity (eqv IEC 60757:1983)
IEC 61346-1:1996 Industrial Systems, Installations and Equipment and Industrial Products — Structuring Principles and Reference Designations — Part 1: Basic Rules
3 Definitions
For the purposes of this standard, the following definitions apply:
3.1 object
entity treated in the process of design, engineering, realization, operation, maintenance and demolition
Notes:
1 The entity may refer to an abstract or physical object or to a set of information associated with it.
2 Depending on purpose an object may be viewed in different ways, called aspects.
