Warning: This standard may involve some hazardous materials, operation and equipment, but doesn't purport to make suggestions on all the safety concerns involved. Prior to using this standard, users are responsible for taking proper safety and health measures and ensuring conformance to those specified in relevant national laws and regulations.
1 Scope
This standard specifies the determination method of total moisture, air dry basis moisture, ash and volatiles and the calculation method of fixed carbon in coke.
This standard is applicable to the determination of total moisture, air dry basis moisture, ash and volatiles and the calculation of fixed carbon in coke.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 1997 Coke - Sampling and Preparation of Samples
3 Determination of Moisture
3.1 General rules
This chapter specifies the determination methods of total moisture and air dry basis moisture in coke.
3.2 Theory
Weigh a certain amount of coke specimen, put it into a drying oven which has been blasted in advance, and then dry at certain temperature until it reaches constant mass. Calculate the mass fraction (%) of moisture according to the mass loss of coke sample.
