This standard specifies requirements, test methods, inspection rules, marking, packaging, transportation and storage, quality certificate and order (or contract) content of copper and copper alloy strip.
This standard is applicable to wrought copper and copper alloy strip for general purposes (hereafter referred to as "strip").
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated reference, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 228.1-2010 Metallic Materials - Tensile Testing - Part 1: Method of Test at Room Temperature
GB/T 232 Metallic Materials - Bend Test
GB/T 351 Metallic Materials - Resistivity Measurement Method
GB/T 4340.1 Metallic Materials - Vickers Hardness Test - Part 1: Test Method
GB/T 5121 (all parts) Methods for Chemical Analysis of Copper and Copper Alloys
GB/T 5231 Designation and Chemical Composition of Wrought Copper and Copper Alloys
GB/T 6147 Test Method for Thermoelectric Power of Precision Resistance Alloys
GB/T 6148 Test Method for Temperature-resistance Coefficient of Precision Resistance Alloys
GB/T 8888 Wrought Heavy Non-ferrous Metal Products - Packing, Marking, Transportation, Storing and Certificate of Quality
GB/T 17793 Wrought Copper and Copper Alloy Plate, Sheet and Strip for General Purposes - Dimensions and Tolerances
GB/T 26303.3 Measuring Methods for Dimensions and Shapes of Wrought Copper and Copper Alloys - Part 3: Sheets and Strips
YS/T347 Copper and Copper Alloys - Estimation of Average Grain Size
YS/T478 Method for Electrical Conductivity Measurement of Copper and Copper Alloys by Use of Eddy Current
YS/T482 Methods for Analysis of Copper and Copper Alloys - the Atomic Emission Spectrometry
YS/T483 Methods for Analysis of Copper and Copper Alloys - X-Ray Fluorescence Spectrometric
YS/T668 The Sampling Method of Physical and Chemical Testing for Copper and Copper Alloys
YS/T815 Preparation Method of Test Pieces for Mechanical and Technological Properties of Copper and Copper Alloys
