Standard No.:	GB/T 22050-2008
Chinese Name:	鞋类 样品和试样的取样位置、准备及环境调节时间
English Name:	Footwear - Sampling location preparation and duration of conditioning of samples and test pieces
Professional Classification:	Y78 Footgear
Professional Classification:	GB National Standard
ICS Classification:	61.060
Issued by:
Issued on:	2008-06-18
Implemented on:	2009-05-01
Status:	VALID
Language:	English
File Format:	PDF
Word Count:	6000 words
Price(USD):	180 (USD)
Delivery:	via email in 1-3 business day

1 Scope

This Standard specifies the sampling location, preparation and duration of conditioning of samples and test pieces for footwear components and footwear.

This Standard is applicable to the test evaluating its performance according to end use.

These are the general conditions unless otherwise stated in the corresponding test method.

2 Normative References

The following normative documents contain provisions which, through reference in this text, constitute provisions of this Standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this Standard. However, parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 3903.8 Footwear - Test Methods for Insoles - Delamination Strength (GB/T 3903.8-2005, ISO 20866:2001, IDT)
GB/T 3903.9 Footwear - Test Methods for Insoles - Heel Pin Holding Strength (GB/T 3903.9-2005, ISO 20867:2001, IDT)
GB/T 3903.10 Footwear - Test Methods for Insoles - Dimensional Stability (GB/T 3903.10-2005, ISO 22651:2002, IDT)
GB/T 3903.11 Footwear - Test Methods for Insoles, Lining and Insocks - Perspiration Resistance (GB/T 3903.11-2005, ISO 22652:2002, IDT)
GB/T 3903.12:2005 Footwear - Test Methods for Outsoles - Tear Strength (ISO 20872:2001, IDT)
GB/T 3903.13:2005 Footwear - Test Methods for Outsoles - Dimensional Stability (ISO 20873:2001, IDT)
GB/T 3903.14:2005 Footwear - Test Methods for Outsoles - Needle Tear Strength (ISO 20874:2001, IDT)
GB/T 3903.22 Footwear - Test Methods for Outsoles - Tensile Strength and Elongation (GB/T 3903.22-2008, ISO 22654:2002, IDT)
QB/T 2882:2007 Footwear - Test Methods for Uppers, Linings and Insocks - Colour Fastness to Rubbing (ISO 17700:2004, IDT)
QB/T 2883:2007 Footwear - Test Methods for Uppers, Linings and Insocks - Tear Strength (ISO 17696:2004, IDT)
QB/T 2884:2007 Footwear - Test Methods for Outsoles - Abrasion Resistance (ISO 20871:2001, IDT)

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本(包括修改单)适用于本标准。
GB/T3903.8 鞋类 内底试验方法 层间剥离强度(GB/T3903.8-2005,ISO20866:2001,IDT)
GB/T3903.9 鞋类 内底试验方法 跟部持钉力(GB/T3903.9-2005,ISO20867:2001,IDT)
GB/T3903.10 鞋类 内底试验方法 尺寸稳定性(GB/T3903.10-2005,ISO22651:2002,IDT)
GB/T3903.11 鞋类 内底、衬里和内垫试验方法 耐汗性(GB/T3903.11-2005,ISO22652:2002,IDT)
GB/T3903.12-2005 鞋类 外底试验方法 撕裂强度(ISO20872:2001,IDT)
GB/T3903.13-2005 鞋类 外底试验方法 尺寸稳定性(ISO20873:2001,IDT)
GB/T3903.14-2005 鞋类 外底试验方法 针撕破强度(ISO20874:2001,IDT)
GB/T3903.22 鞋类 外底试验方法 抗张强度和伸长率(GB/T3903.22-2008,ISO22654:2002,IDT)
QB/T2882-2007 鞋类 帮面、衬里和内垫试验方法 摩擦色牢度(ISO17700:2004,IDT)
QB/T2883-2007 鞋类 帮面、衬里和内垫试验方法 撕裂力(ISO17696:2004,IDT)
QB/T2884-2007 鞋类 外底试验方法 耐磨性能(ISO20871:2001,IDT)
QB/T2885 鞋类 外底试验方法 耐折性能(QB/T2885-2007,ISO17707:2005,IDT)
ISO5404 皮革 物理和机械性能试验方法 重革的防水性
ISO17693 鞋类 帮面试验方法 可绷帮性
ISO17694 鞋类 帮面和衬里试验方法 耐折性能
ISO17695 鞋类 帮面试验方法 形变性
ISO17697:2003 鞋类 帮面、衬里和内垫试验方法 缝线强度
ISO17698 鞋类 帮面试验方法 层间剥离强度
ISO17699 鞋类 帮面和衬里试验方法 透水气性和吸水气性
ISO17701 鞋类 帮面、衬里和内垫试验方法 颜色迁移性
ISO17702 鞋类 帮面试验方法 防水性
ISO17703 鞋类 帮面试验方法 高温性能
ISO17704 鞋类 帮面、衬里和内垫试验方法 耐磨性能
ISO17705 鞋类 帮面、衬里和内垫试验方法 绝热性能
ISO17706 鞋类 帮面试验方法 抗张强度和伸长率
ISO20865 鞋类 外底试验方法 压缩能