1 Scope
This Part of GB/T 223 specifies a hydride generation-atomic fluorescence spectrometric method for the determination of the trace bismuth and arsenic contents in iron, steel and alloy.
This method is applicable to the determination of bismuth and arsenic contents in steel, iron and nickel-base alloy. Bismuth content (m/m): 0.00005%~0.01%; arsenic content (m/m): 0.00005%~0.01%.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this Part of GB/T 223. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB/T 6379.1 Accuracy (Trueness and Precision) of Measurement Methods and Results-Part 1: General Principles and Definitions (GB/T 6379.1-2004, ISO 5725-1: 1994, IDT)
GB/T 6379.2 Accuracy (Trueness and Precision) of Measurement Methods and Results Part 2: Basic Method for the Determination of Repeatability and Reproducibility of a Standard Measurement Method (GB/T 6379.2-2004, ISO 5725-2: 1994, IDT)
GB/T 20066 Steel and Iron-Sampling and Preparation of Samples for the Determination of Chemical Composition (GB/T 20066-2006, ISO 14284: 1996, IDT)
3 Principle