This standard specifies the technical requirements, test methods, test rules, packing, transportation and storage of leather sandals with upper made from natural leather, artificial leather, synthetic leather, textiles or multiple materials, manufactured by processes of gluing, sewing, mould pressing, vulcanizing, injection molding, grouting, etc.
This standard is applicable to leather sandals (including long sandals) for adults, and not applicable to leather sandals (including long sandals) for infants and children. Sandals with upper made from other materials and manufactured by the equivalent processes may also refer to the provisions of this standard.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2703 Footwear—Vocabulary
GB/T 2912.1-2009 Textiles—Determination of Formaldehyde—Part 1: Free and Hydrolyzed Formaldehyde (Water Extraction Method)
GB/T 3293 Chinese Last Systems
GB/T 3293.1 Shoes Sizes
GB/T 3903.1-2008 Footwear—General Test Methods—Flexing Resistance
GB/T 3903.2-2008 Footwear—General Test Methods—Abrasion Resistance
GB/T 3903.3-2011 Footwear—General Test Methods—Peeling Strength
GB/T 3903.4-2008 Footwear—General Test Methods—Hardness
GB/T 3903.5-2011 Footwear—General Test Methods—Appearance Quality
GB/T 11413-2015 Test Method for Bond Strength of Leather Shoe Heels
GB/T 17592-2011 Textiles—Determination of the Banned Azo Colorants
GB/T 19941-2005 Leather and Fur—Chemical Tests—Determination of Formaldehyde Content
GB/T 19942-2005 Leather and Fur—Chemical Tests—Determination of Banned Azo Colorants
GB/T 20991-2007 Personal Protective Equipment—Test Methods for Footwear
GB/T 21396-2008 Footwear—Test Methods for Whole Shoe—Upper Sole Adhesion
GB/T 26703-2011 Determination of Abrasion Resistance for Top Piece of Leather Shoes—Rotation Cylindrical Drum Method
GB/T 28011 Shanks for Footwear
QB/T 1187 Footwear—Principle of Inspection and Marking, Package, Transportation, Storage
QB/T 1472-2013 Flexing Index of Fiberous Board for Footwear
QB/T 2673 Footwear—Specification of Marking
QB/T 2882-2007 Footwear—Test Methods for Uppers, Linings and Insocks—Color Fastness to Rubbing
QB/T 4862-2015 Midsoles for Footwear
3 Terms and Definitions
For the purposes of this document, the terms and definitions defined in GB/T 2703 as well as the following ones apply.
3.1
primary site
generally, it refers to outer side of upper, forepart, counter-heel and toe-puff.
GB/T 22756-2017 The following standards are cited：
