This standard specifies terms and definitions, designation, types, equipment compositions, basic parameters, aseptic filling line operating conditions, requirements, test methods, inspection rules, mark, packaging, transport and storage requirements for aseptic PET bottles cold-filling line (hereinafter referred to as "aseptic filling line").
This standard is applicable to aseptic cold-filling line of plastic bottles (PET, etc.) using for liquid food, and apply to food industry, etc.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 191 Packaging — Pictorial marking for handling of goods
GB 2894 Safety signs and guideline for the use
GB/T 4789.2 Microbiological examination of food hygiene — Detection of aerobic bacterial count
GB/T 4789.15 Microbiological examination of food hygiene-Examination of molds and yeasts
GB/T 4789.26 Microbiological examination of food hygiene-Examination of commercial sterilization of canned food
GB/T 5048 Moistureproof packaging
GB 5226.1-2002 Safety of machinery — Electrical equipment of machines — Part 1: General requirements (IEC 60204-1:2000, IDT)
GB 5749 Standards for drinking water quality
GB/T 7311 Classification and editorial nominating method for packaging machinery
GB 9969 General principles for preparation of instructions for use of industrial products
GB 12695 Good manufacturing practice of drink factory
GB/T 13306 Plates
GB/T 13384 General specifications for packing of mechanical and electrical product
GB 16179 Guidelines for the use of safety signs
GB/T 16273.1 Graphical symbols for use on equipment — Part 1: Common symbols (GB/T 16273.1-2008, ISO 7000:2004, NEQ)
GB/T 16292 Test method for airborne particles in clean room(area)the pharmaceutical industry
GB/T 16293 Test method for airborne microbe in clean room(area)the pharmaceutical industry
GB/T 16294 Test method for settling microbe in clean room(area)the pharmaceutical industry
GB 16798 Requirements of safety and sanitation for food machinery
GB/T 17876 Packaging volume — Plastic pilferproof closure
GB/T 18883-2002 Indoor air quality standard
GB 19891 Safety of machinery — Hygiene requirements for the design of machinery (GB 19891-2005, ISO 14159:2002, MOD)
JB/T 7232 Packaging machinery — Determination of sound power lever for noise — Survey method
JB 7233 Packaging machinery — Safety requirements
QB 1868 Polyethylene terephthalate (PET) bottle for carbonation drink
JJF 1070 Rules of Metrological Testing for Net Quantity of Products in Prepackages with Fixed Content
"Technical Specification for Disinfection" (2002 Edition) issued by the Ministry of Health of the People's Republic of China
3 Terms and Definitions
For the purpose of this standard, the following terms and definitions apply.
3.1
Commercial sterilization
Liquid food within the package is free of pathogenic bacteria and microbes which are proliferous under normal temperature.
