This standard specifies the terms and definitions, classification and naming, requirements, test methods, inspection rules as well as marking, packaging, transport, storage and operating instructions in terms of dining tables and chairs.
This standard is applicable to independent and movable dining tables and chairs (including stools, the same below) made of materials such as wood, metal, glass and stone for indoor dining of domestic or commercial places. This standard may also serve as a reference for products made of other materials.
This standard is not applicable to foldable dining tables and chairs or those in the form of integrated table and chair, nor is it applicable to dining tables and chairs for children and dining tables with an electric bearing.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest editions apply.
GB/T 191 Packaging - Pictorial marking for handling of goods
GB/T 1732-1993 Determination of impact resistance of film
GB/T 1931 Method for determination of the moisture content of wood
GB/T 2828.1-2003 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 2912.1 Textiles - Determination of formaldehyde - Part 1: Free and hydrolyzed formaldehyde (water extraction method)
GB/T 3324 Wooden furniture - General technical requirements
GB/T 3325 Metal furniture - General technical requirements
GB/T 4893.1-2005 Furniture - Assessment of surface resistance to cold liquids
GB/T 4893.2-2005 Furniture - Assessment of surface resistance to wet heat
GB/T 4893.3-2005 Furniture - Assessment of surface resistance to dry heat
GB/T 4893.4-1985 Furniture - Assessment of adhesion of surface coatings - Cross cut
GB/T 4893.7-1985 Furniture - Assessment of surface resistance to alteration of heat and cold
GB/T 4893.8-1985 Furniture - Assessment of wearability of surface coatings
GB/T 4893.9-1992 Furniture - Test for surfaces - Assessment of resistance to impact
GB 5296.6 Instructions for use of products of consumer interest - Part 6: Furniture
GB/T 6491-1999 Drying quality of sawn timber
(USD)