1 Scope
This standard specifies the requirements, inspection (testing) method, inspection classification rules as well as marking, packaging, transportation, storage and other technical features for the shirts and blouses.
This standard is applicable to the shirts and blouses with textile woven fabrics as the major raw materials.
This standard is not applicable to the products for the infants and young children within 24 months.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB 250 Gray scale for assessing change in colour
GB 251 Gray scale for assessing staining
GB/T 1335.1 Standard sizing systems for garments - Men
GB/T 1335.2 Standard sizing systems for garments - Women
GB/T 1335.3 Standard sizing systems for garments - Children
GB/T 2667 Sizes for shirts and blouses
GB/T 2910 Textile--Binary fibre mixtures--Quantitative chemical analysis
GB/T 2911 Textile--Binary fibre mixtures--Quantitative chemical analysis
GB/T 2912.1 Textiles--Determination of formaldehyde--Part 1: Free and hydrolyzed formaldehyde (Water extraction method)
GB/T 3917.2 Textiles--Tear properties of fabrics--Part 2: Determination of tear force of tongue shaped test specimens
GB/T 3920 Textiles-Tests for colour fastness-Colour fastness to rubbing
GB/T 3921 Textiles-Tests for colour fastness-Colour fastness to washing with soap or soap and soda
GB/T 3922 Textiles--Testing method for colour fastness to perspiration
GB/T 4841.3 Colour cards of standard depths for dyeing with dyestuffs 2/1, 1/3, 1/6, 1/12, 1/25
GB 5296.4 Instructions for use of products of consumer interest--Instructions for use of textiles and apparel
GB/T 5711 Textiles-Tests for colour fastness-Colour fastness to dry cleaning
GB/T 5713 Textiles-Tests for colour fastness-Colour fastness to water
GB/T 7573 Textiles--Determination of pH of the aqueous extract
GB/T 8170 Rules for Rounding off of Numberical Values
GB/T 8427-1998 Textiles-Tests for colour fastness Colour fastness to artificial light: Xenon arc fading lamp test
GB/T 8630 Textiles--Determination of dimensional change in washing and drying
GB/T 14801 Test method for skewness and bow in woven and knitted fabrics
GB/T 17592 Textiles - Determination of the banned azo colourants
GB/T 18132 Silk garments
GB 18383 General Technical Requirements for Products with Filling Materials
GB 18401 National General Safety Technical Code for Textile Products
GB/T 21295 Requirement of the garments intrinsic quality
FZ/T 01026 Quaternary fibre mixtures - Quantitative chemical analysis
FZ/T 01053 Textiles-Identification of fiber content
FZ/T 01057 (all parts) Test method for identification of textile fibres
FZ/T 01095 Textile--Test method of elastane fibre content
FZ/T 30003 Method for quantitative analysis of ramie (flax hemp) cotton blended textile—Micro projection
FZ/T 80002 Marking packaging transportation and storage for garments
FZ/T 80004 Rule for garments delivery inspection
FZ/T 80007.3 Dry wash resistance test method for garments used adhesive interlining
3 Requirements
3.1 Instructions for use
Instructions for use of finished products shall comply with the requirements of GB 5296.4 and GB 18401.
3.2 Size designation and specification
3.2.1 Size designation setting shall comply with the requirements of GB/T 1335.1~1335.3.
3.2.2 Specifications of main positions of finished product shall be designed independently according to the relevant requirements of GB/T 2667 or GB/T 1335.1~1335.3.
3.3 Raw materials
3.3.1 Shell fabric
Shell fabric of conformity to the quality requirement of this Standard shall be selected according to the relevant standards related to the textile shell fabric.
3.3.2 Lining
Lining with property and color matching with the shell fabric used shall be adopted.
3.3.3 Accessories
3.3.3.1 Interlining: matching the properties of the shell fabric.
3.3.3.2 Stitch thread: the stitch thread suitable for the quality of the used shell fabric and accessories.shall be selected. Allowable degree of colour difference between stitch thread and shell fabric is light half grade and deep one grade (printing, stripe and plaid, colored woven raw materials shall be subject to the essential colour, excluding the ornamental thread). Button thread shall be matched with the color and luster of the button (excluding the special design). Brand thread shall be matched with the brand ground colour.
3.3.3.3 Button: proper thickness and color, free from defects, deformation, discolouring after washing and ironing.
3.3.4 Filler
It shall meet the requirements of GB 18383.
3.4 Warp and weft direction
Allowable inclination degrees of front fly of right warping (converse warping is not allowable), back fly and sleeve shall be in accordance with the requirements of Table 1.
