Standard No.:	GB/T 276-2013
Chinese Name:	滚动轴承 深沟球轴承 外形尺寸
English Name:	Rolling bearings—Deep groove ball bearings—Boundary dimensions
Professional Classification:	J11 Rolling bearing
Professional Classification:	GB National Standard
ICS Classification:	21.100.20 Rolling bearings
Issued by:
Issued on:	2013-09-18
Implemented on:	2014-06-01
Status:	VALID
Replace:	GB/T276-1994 Rolling bearings—Deep groove ball bearings—Boundary dimensions
Language:	English
File Format:	PDF
Word Count:	10000 words
Price(USD):	300 (USD)
Delivery:	via email in 1-3 business day

This standard specifies the boundary dimensions of deep groove ball bearings, deep groove ball bearings with snap ring groove on outer rings, deep groove ball bearings with snap ring groove and snap ring on outer rings, deep groove ball bearings with dust cap and deep groove ball bearings (bearing replaced in the following) with seal ring with boundary dimension in accordance with GB/T 273.3-1999 "Rolling Bearings-Radial Bearings-Boundary Dimensions".
This standard is applicable to the design and type selection of bearing.

下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件,仅注日期的版本适用于本文件。凡是不注日期的引用文件,其最新版本(包括所有的修改单)适用于本文件。
GB/T272—1993 滚动轴承 代号方法
GB/T273.3—1999 滚动轴承 向心轴承 外形尺寸总方案
GB/T274—2000 滚动轴承 倒角尺寸最大值
GB/T305—1998 滚动轴承 外圈上的止动槽和止动环 尺寸和公差
GB/T6930—2002 滚动轴承 词汇
GB/T7811—2007 滚动轴承 参数符号
JB/T2974—2004 滚动轴承 代号方法的补充规定