Materials for high vacuum multilayer insulation of cryogenic vessel
1 Scope
This standard specifies the product types and models, raw materials, technical requirements, test methods, inspection rules, as well as marking, product end-of-manufacturing information, packaging, transportation and storage of common materials for high vacuum multilayer insulation of cryogenic vessel.
This standard is applicable to the insulation materials formed by alternately combining spacing materials and heat-resistant radiation shields used in the cryogenic vessel adopting high vacuum multilayer insulation mode.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 451.1 Paper and board - Determination of size and deviation
GB/T 451.2 Paper and board - Determination of grammage
GB/T 451.3 Paper and board - Determination of thickness
GB/T 3198 Aluminium and aluminium alloys foils
GB/T 9914.2 Test method for reinforcement products - Part 2: Determination of combustible-matter content for glass fibre
GB/T 12914 Paper and board - Determination of tensile properties
GB/T 14014 Synthetic fiber bolting cloths
GB/T 15717 Test method for vacuum-deposited metal thickness - Electric resistance method
GB/T 16958 Biaxially oriented polyester film for package
GB/T 22638.5 Test methods for aluminium and aluminium alloy foils - Part 5: Determination of wettability by brushing
GB/T 31481-2015 Guidance for gas/materials compatibility of cryogenic vessels
BB/T 0030-2004 Plastic packaging film deposited with aluminum
JB/T 8105.1 Rubber seal connections of vacuum gauges
JB/T 8105.2 Metal seal connections of vacuum gauges
JC/T 170 E-glass fiber fabrics
3 Terms and definitions
For the purpose of this document, the following terms and definitions apply.