This standard specifies rated value, technical requirements, test methods, inspection rules as well as requirements for marking, packaging, transport and storage of swapping battery pack connector (hereinafter referred to as "connector") of electric vehicle.
This standard is applicable to design, production and application of swapping battery pack connector of electric vehicle.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 4208-2008 Degrees of Protection Provided by Enclosure (IP Code)
GB/T 11918.1-2014 Plugs, Socket-outlet and Couplers for Industrial Purposes - Part 1:General Requirements
GB/T 19596 Terminology of Electric Vehicles
GB/T 20234.1-2015 Connection Set for Conductive Charging of Electric Vehicles - Part 1:General Requirements
QC/T 413-2002 Basic Technical Requirements for Automotive Electric Equipment
ISO 16750-3: 2012 (Road Vehicles - Environmental Conditions and Testing for Electrical and Electronic Equipment - Part 3: Mechanical Loads)
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in GB/T 11918.1-2014, GB/T 19596 and GB/T 20234.1-2015 and the following apply.
3.1
swappable battery pack coupler
special electric connector realizing conduction-type connection between battery pack and electric vehicle as well as battery pack and charging rack, which consists of coupler plug and coupler socket-outlet
3.2
coupler plug
the part connecting to battery pack in swappable battery pack coupler
3.3
GB/T 32879-2016 The following standards are cited：
