This standard specifies terms and definitions, classification, requirements, test methods, inspection rules, marking, use instruction, packaging, transportation and storage of wooden furniture.
This standard is applicable to the wooden furniture. The wooden parts of other furniture may also refer to the provisions of this standard.
2 Normative References
The following documents for the application of this document are essential. Any dated reference, just dated edition applies to this document. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 1931 Method for Determination of the Moisture Content of Wood
GB/T 2828.1-2012 Sampling Procedures for Inspection by Attributes - Part1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection
GB/T 4893.1 Furniture - Assessment of Surface Resistance to Cold Liquids
GB/T 4893.2 Furniture - Assessment of Surface Resistance to Wet Heat
GB/T 4893.3 Furniture - Assessment of Surface Resistance to Dry Heat
GB/T 4893.4-2013 Test of Surface Coatings of Furniture - Part 4: Determination of Adhesion - Cross Cut
GB/T 4893.7-2013 Test of Surface Coatings of Furniture - Part 7: Determination of Surface Resistance to Alternation of Heat and Cold
GB/T 4893.8-2013 Test of Surface Coatings of Furniture - Part 8: Determination of Wearability
GB/T 4893.9-2013 Test of Surface Coatings of Furniture - Part 9: Determination of Resistance to Impact
GB/T 5296.6 Instructions for Use of Products of Consumer Interest - Part 6: Furniture
GB/T 10357.1-2013 Test of Mechanical Properties of Furniture - Part 1: Strength and Durability of Tables
GB/T 10357.2-2013 Test of Mechanical Properties of Furniture - Part 2: Stability of Chairs and Stools
GB/T 10357.3-2013 Test of Mechanical Properties of Furniture - Part 3: Strength and Durability of Chairs and Stools
GB/T 10357.4-2013 Test of Mechanical Properties of Furniture - Part 4 : Stability of Storage Units
GB/T 10357.5-2011 Test of Mechanical Properties of Furniture - Part 5: Strength and Durability of Storage Units
GB/T 10357.6-2013 Test of Mechanical Properties of Furniture - Part 6: Strength and Durability of Beds
GB/T 10357.7-2013 Test of Mechanical Properties of Furniture - Part 7: Stability of Tables
GB/T 10357.8-2015 Test of Mechanical Properties of Furniture - Part 8: Stability of Chairs with Tilting or Reclining Mechanisms When Fully Reclined, and Rocking Chairs.
GB/T 17592 Textiles - Determination of the Banned Azo Colourants
GB/T 17657-2013 Test Methods of Evaluating the Properties of Wood-based Panels and Surface Decorated Wood-based Panels
GB 18584 Indoor Decorating and Refurbishing Materials - Limit of Harmful Substances of Wood Based Furniture
GB/T 19942 Leather and Fur - Chemical Tests - Determination of Banned Azo Colourants
GB/T 23344 Textiles - Determination of 4-aminoazobenzene
GB/T 24430.2-2009 Bunk Beds for Domestic Use - Safety - Part 2: Test
GB/T 28202-2011 Furniture Industry Terminology
QB/T 2385 Valuable Hardwood Furniture in Deep Color
QB/T 3826 Corrosion-resistant Testing Method of the Metal Deposits and Conversion Coatings for the Light Industrial Products - Neutral Salt Spraying Test (NSS)
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in GB/T 28202-2011 as well as the following apply.
3.1
wooden furniture
furniture made of wooden materials such as wood and wood-based panels, except the decorative parts and fittings in main components and parts
[GB/T 28202-2011, 2.1.1]
