This standard specifies terms and definitions, classification, requirements, test methods, inspection procedures, inspection rules, marking, use instruction, packaging, transportation and storage of metal furniture.
This standard is applicable to the metal furniture product with the major structure made of metal. Other furniture containing metal member may also refer to the provisions of this standard.
2 Normative References
The following documents for the application of this document are essential. Any dated reference, just dated edition applies to this document. For undated references, the latest edition of the normative document (including any amendments) applies.
GB 250 Textiles-Tests for Colour Fastness-Grey Scale for Assessing Change in Colour
GB/T 1043.1 Plastics - Determination of Charpy Impact Properties - Part 1: Non-instrumented Impact Test
GB/T 1732 Determination of Impact Resistance of Film
GB/T 1931 Method for Determination of the Moisture Content of Wood
GB/T 2828.1-2012 Sampling Procedures for Inspection by Attributes - Part1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection
GB/T 3920 Textiles - Tests for Colour Fastness - Colour Fastness to Rubbing
GB/T 4689.20 Leather - Determination for Adhesion of Finish
GB/T 4893.1 Furniture - Assessment of Surface Resistance to Cold Liquids
GB/T 4893.2 Furniture - Assessment of Surface Resistance to Wet Heat
GB/T 4893.3 Furniture - Assessment of Surface Resistance to Dry Heat
GB/T 4893.4 Test of Surface Coatings of Furniture - Part 4: Determination of Adhesion - Cross Cut
GB/T 4893.7 Test of Surface Coatings of Furniture - Part 7: Determination of Surface Resistance to Alternation of Heat and Cold
GB/T 4893.8 Test of Surface Coatings of Furniture - Part 8: Determination of Wearability
GB/T 4893.9 Test of Surface Coatings of Furniture - Part 9: Determination of Resistance to Impact
GB/T 5296.6 Instructions for Use of Products of Consumer Interest - Part 6: Furniture
GB/T 6669-2008 Flexible Cellular Polymeric Materials - Determination of Compression Set
GB/T 6739 Paints and Varnishes - Determination of Film Hardness by Pencil Test
GB/T 7573 Textiles - Determination of pH of the Aqueous Extract
GB/T 9286 Paints and Varnishes - Cross Cut Test for Films
GB/T 10357 (all parts) Test of Mechanical Properties of Furniture
GB/T 13667.1-2015 Steel Bookshelves - Part 1: Bookshelf of Single Column and Multi-column
GB/T 16422.2 Plastics - Methods of the Exposure to Laboratory Light Sources - Part 2: Xenon-arc Sources
GB/T 17592 Textiles - Determination of the Banned Azo Colourants
GB/T 17657-2013 Test Methods of Evaluating the Properties of Wood-based Panels and Surface Decorated Wood-based Panels
GB 18580 Indoor Decorating and Refurbishing Materials - Limit of Formaldehyde Emission of Woodbased Panels and Finishing Products
GB 18584 Indoor Decorating and Refurbishing Materials - Limit of Harmful Substances of Wood Based Furniture
CB/T 19942 Leather and Fur - Chemical Tests - Determination of Banned Azo Colourants
GB 24430.1-2009 Bunk Beds for Domestic Use - Safety - Part 1: Requirements
GB/T 24430.2-2009 Bunk Beds for Domestic Use - Safety - Part 2: Test
GB 28008-2011 Safety Requirements of Glass Furniture
GB/T 28202-2011 Furniture Industry Terminology
QB/T 1951.2-2013 Metal furniture - Quality Test and Evaluation
QB/T 2537 Leather - Tests for Colour Fastness - Colour Fastness to Reciprocating Rubbing
QB/T 2724 Leather - Chemical Test - Determination of ph
QB/T 3826 Corrosion-resistant Testing Method of the Metal Deposits and Conversion Coatings for the Light Industrial Products - Neutral Salt Spraying Test (NSS)
QB/T 4156-2010 Office Furniture - Microcomputer Desk
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in GB/T 28202-2011 as well as the following apply.
