This part of GB/T 3810 specifies rules for batching, sampling, inspection and acceptance/rejection of ceramic tiles.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of GB/T 3810. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 3810.2 Test Methods of Ceramic Tiles — Part 2: Determination of Dimensions and Surface Quality (GB/T 3810.2-2006, ISO 10545-2:1995, MOD)
GB/T 3810.3 Test Methods of Ceramic Tiles — Part 3: Determination of Water Absorption, Apparent Porosity, Apparent Relative Density and Bulk Density (GB/T 3810.3-2006, ISO 10545-3:1995, MOD)
GB/T 3810.4 Test Methods of Ceramic Tiles — Part 4: Determination of Modulus of Rupture and Breaking Strength (GB/T 3810.4-2006, ISO 10545-4:1994, IDT)
GB/T 3810.5 Test Methods of Ceramic Tiles — Part 5: Determination of Impact Resistance by Measurement of Coefficient of Restitution (GB/T 3810.5-2006, ISO 10545-5:1996, IDT)
GB/T 3810.6 Test Methods of Ceramic Tiles — Part 6: Determination of Resistance to Deep Abrasion for Unglazed Tiles (GB/T 3810.6-2006, ISO 10545-6:1995, IDT)
GB/T 3810.7 Test Methods of Ceramic Tiles — Part 7: Determination of Resistance to Surface Abrasion for Glazed Tiles (GB/T 3810.7-2006, ISO 10545-7:1996, IDT)
GB/T 3810.8 Test Methods of Ceramic Tiles — Part 8: Determination of Linear Thermal Expansion (GB/T 3810.8-2006, ISO 10545-8:1994, IDT)
GB/T 3810.9 Test Methods of Ceramic Tiles — Part 9: Determination of Resistance to Thermal Shock (GB/T 3810.9-2006, ISO 10545-9:1994, IDT)
GB/T 3810.10 Test Methods of Ceramic Tiles — Part 10: Determination of Moisture Expansion (GB/T 3810.10-2006, ISO 10545-10:1995, IDT)
GB/T 3810.11 Test Methods of Ceramic Tiles — Part 11: Determination of Crazing Resistance for Glazed Tiles (GB/T 3810.11-2006, ISO 10545-11:1994, IDT)
GB/T 3810.12 Test Methods of Ceramic Tiles — Part 12: Determination of Frost Resistance (GB/T 3810.12-2006, ISO 10545-12:1995, IDT)
GB/T 3810.13 Test Methods of Ceramic Tiles — Part 13: Determination of Chemical Resistance (GB/T 3810.13-2006, ISO 10545-13:1995, IDT)
GB/T 3810.14 Test Methods of Ceramic Tiles — Part14: Determination of Resistance to Stains (GB/T 3810.14-2006, ISO 10545-14:1995, IDT)
GB/T 3810.15 Test Methods of Ceramic Tiles — Part 15: Determination of Lead and Cadmium Given Off by Glazed Tiles (GB/T 3810.15-2006, ISO 10545-15:1995, IDT)
GB/T 3810.16 Test Methods of Ceramic Tiles — Part 16: Determination of Small Colour Differences (GB/T 3810.16-2006, ISO 10545-16:1999, IDT)
GB/T 4100-2006 Ceramic Tiles (ISO 13006:1998, MOD)
GB/T 13891 Test Methods of Specular Gloss for Decorative Building Materials
3 Definitions
For the purposes of this part of GB/T 3810, the following terms and definitions apply.
3.1 Order
Quantity of tiles ordered at one time. An order may consist of one or more consignments.
3.2 Consignment
Quantity of tiles delivered during a period of 2 days.
3.3 Homogeneous (sub)consignment
