Standard No.:	GB/T 5095.4-1997
Chinese Name:	电子设备用机电元件 基本试验规程及测量方法 第4部分:动态应力试验
English Name:	Electromechanical components for electronic equipment Basic testing procedures and measuring methods-Part 4: Dynamic stress tests
Professional Classification:	L23 Connector
Professional Classification:	GB National Standard
ICS Classification:	31.220
Issued by:
Issued on:	1997-12-26
Implemented on:	1998-10-01
Status:	VALID
Language:	English
File Format:	PDF
Word Count:	3000 words
Price(USD):	90 (USD)
Delivery:	via email in 1-3 business day

Scope

The tests contained herein, when required by the detail specification, shall be used for electromechanical components within the scope of Technical Committee No. 48*. They may also be used for similar devices when specified in a detail specification.

1 Test 6a: Acceleration, steady state

1.1 Object

The object of this test is to detail a standard test method to assess the ability of components to withstand specified severities of acceleration.

1.2 Mounting of specimen

The specimen shall be mounted as specified in the detail specification.

1.3 General requirements

1.3.1 This test shall be conducted in accordance with IEC Publication 68-2-7, Basic Environmental Testing Procedures, Part 2: Tests - Test Ga: Acceleration, Steady State, using the degree of severity specified in the detail specification.

1.3.2 Unless otherwise specified, each specimen shall be wired according to the manufacturer’s instructions.

1.3.3 Specimens shall be tested in a manner such that all mechanical features, such as panel-mounting arrangements, locking and retaining devices, are fully utilized.