This standard specifies the terminologies and definitions for test methods of physical properties of pneumatic tyre (cover tyre, inner tyre and rim tape), specimen preparation, test for physical properties of cover tyre, analysis and determination method for permeability of tyre inner liner, tests for physical properties of inner tyre and rim tape.
This standard is applicable to passenger car tyre, truck tyre, agricultural tyre, earth-mover tyre and industrial pneumatic tyre.
This standard is not applicable to aircraft tyre, motorcycle tyre and cycle tyre.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrigendum), or revisions of, any of these publications do not apply. However, all parties coming to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB/T 528 Rubber, Vulcanized or Thermoplastic - Determination of Tensile Stress-strain Properties (GB/T 528-1998, eqv ISO 37:1994)
GB/T 529 Rubber, Vulcanized or Thermoplastic - Determination of Tear Strength" (Trouser, Angle and Crescent Test Pieces) (GB/T 529-1999, eqv ISO 34-1:1994)
GB/T 531 Rubber - Determination of Indentation Hardness by Means of Pocket Hardness Meters (GB/T 531-1999, idt ISO 7619:1986)
GB/T 532 Rubber, Vulcanized or Thermoplastic - Determination of Adhesion to Textile Fabric (GB/T 532-1997, idt ISO 36:1993)
GB/T 1682 Rubber, Vulcanized - Determination of Low-temperature Brittleness (Single Test Piece Method)
GB/T 1689 Rubber Vulcanized - Determination of Abrasion Resistance (Akron Machine) (GB/T 1689-1998, neq BS 903: Part A9:1988)
GB/T 2941 Rubber - General Procedures for Preparing and Conditioning Test Pieces for Physical Test Methods (GB/T 2941-2006, ISO 23529:2004, IDT)
GB/T 3512 Rubber, Vulcanized or Thermoplastic - Accelerated Ageing and Heat Resistance Tests - Air-oven Method (GB/T 3512-2001, eqv ISO188:1998, Rubber Vulcanized or Thermoplastic - Accelerated Ageing and Heat Resistance Tests)
GB/T 6039 Rubber Physical Tests and Chemical Tests - Terms (GB/T 6039-1997, eqv ISO 1382:1996 Rubber - Vocabulary)
GB/T 6326 Tyre Terms (GB/T 6326-2005, ISO 4223-1:2002, Definitions of Some Terms Used in the Tyre Industry - Part 1: Pneumatic Tyres, NEQ)
GB/T 11181 Steel Cord for Radial Tyre
HG/T 3836 Vulcanized Rubber - Determination of Abrasion Resistance Under Slipping
3 Terminologies and Definitions
For the purpose of this standard, terminologies and definitions specified in GB/T 6326 and GB/T 6039 apply.