This standard specifies the requirements, inspection equipment, reference block, inspection, acceptance, inspection record and report of the ultrasonic inspection for wrought titanium and titanium alloy products.
This standard is applicable to the ultrasonic inspection for the wrought titanium and titanium alloy products with cross-section thickness larger than 6 mm~230 mm.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative documents referred to applies.
JB/T 10061 Commonly Used Specification for A-mode Ultrasonic Flaw Detector Using Pulse Echo Technique
下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
JB/T10061 A 型脉冲反射式超声波探伤仪通用技术条件
