This part of GB/T 7672 specifies general requirements of glass-fiber wound resin or varnish glass-fiber wound resin or varnish impregnated bare or enamelled rectangular copper wire.
The range of nominal conductor dimensions is given in the relevant product standard (see Annex C for product model and designation).
When reference is made to a glass-fiber winding wire according to a standard of the GB/T 7672.3, GB/T 7672.4 and GB/T 7672.5 mentioned under Clause 2, the following information shall be given:
The following standards contain provisions which, through reference in this part of GB/T 7672, constitute provisions of this part. For dated references, subsequent amendments (excluding corrections) to, or revisions, of any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest editions apply.
GB/T 321-2005 Preferred numbers - Series of preferred numbers (ISO 3:1973, IDT)
GB/T 4074.1 Winding wires - Test methods - Part 1: General (GB/T 4074.1-2008, IEC 60851-1:1996, IDT)
GB/T 4074.2 Winding wires - Test methods - Part 2: Determination of dimensions (GB/T 4074.2-2008, IEC 60851-2:1997, IDT)
GB/T 4074.3 Winding wires - Test methods - Part 3: Mechanical properties (GB/T 4074.3-2008, IEC 60851-3:1997, IDT)
GB/T 4074.4 Winding wires - Test methods - Part 4: Chemical properties (GB/T 4074.4-2008, IEC 60851-4:2005, IDT)
GB/T 4074.5 Winding wires - Test methods - Part 5: Electrical properties (GB/T 4074.5-2008, IEC 60851-5:2004, IDT)
GB/T 4074.6 Winding wires - Test methods - Part 6: Thermal properties (GB/T 4074.6-2008, IEC 60851-6:1996, IDT)
GB/T 7672.3 Glass-fiber wound winding wires - Part 3: Glass-fiber wound resin or varnish impregnated bare or enamelled rectangular copper wire temperature index 155 (GB/T 7672.3-2008, IEC 60317-32:1990, IDT)
GB/T 7672.4 Glass-fiber wound winding wires - Part 4: Glass-fiber wound resin or varnish impregnated bare or enamelled rectangular copper wire temperature index 180 (GB/T 7672.4-2008, IEC 60317-31:1990, IDT)
GB/T 7672.5 Glass-fiber wound winding wires - Part 5: Glass-fiber wound resin or varnish impregnated bare or enamelled rectangular copper wire temperature index 200 (GB/T 7672.5-2008, IEC 60317-33:1990, IDT)
