This Standard specifies environmental conditions, types, basic parameters, technical requirements, installation & acceptance, marking, packaging, transportation and storage, operation, application and maintenance of electric fence system.
This Standard also specifies technical requirements, test methods, test rules of electric fence system energizer. This Standard applies to electric fence system.
2 Normative References
The following standards for the application of this Standard is essential. Any dated reference, just dated edition applies to this Standard. For undated references, the latest edition (including any amendments) applies to this Standard.
GB/T 2423.1-2008 Environmental Testing - Part 2: Test Methods - Tests A: Cold (IEC 60068-2-1:2007, IDT)
GB/T 2423.2-2008 Environmental Testing - Part 2: Test Methods - Tests B: Dry Heat (IEC 60068-2-2:2007, IDT)
GB/T 2423.3-2006 Environmental Testing for Electric and Electronic Products - Part 2: Testing Method Test Cab: Damp Heat Steady State (IEC 60068-2-78:2001, IDT)
GB/T 2423.4-2008 Environmental Testing for Electric and Electronic Products - Part 2: Test Method - Test Db: Damp Heat, Cyclic (12h+12h Cycle) (IEC 60068-2-30: 2005, IDT)
GB/T 2423.55-2006 Environmental Testing for Electric and Electronic Products - Part 2: Test Methods--Test Eh: Hammer Tests (IEC 60068-2-75:1997, IDT)
GB 4208 Degrees of Protection Provided by Enclosure (IP Code) (eqv GB 4208-2008, IEC 60529:2001, IDT)
GB 4343.1-2009 Electromagnetic Compatibility - Requirements for Household Appliances Electric Tools and Similar Apparatus - Part 1: Emission (IEC/CISPR 14-1:2005, IDT)
GB/T 6113.101-2008 Specification for Radio Disturbance and Immunity Measuring Apparatus and Methods - Part 1-1: Radio Disturbance and Immunity Measuring Apparatus - Measuring Apparatus
GB 9254-2008 Information Technology Equipment-Immunity Characteristics-Limits and Methods of Measurement (IEC/CISPR 22:2006, IDT)
GB 12663-2001 General specifications for burglar-alarm control units
GB/T 16935.1-2008 Insulation Coordination for Equipment within Low-Voltage Systems - Part 1: Principles Requirements and Tests (IEC 60664-1:2007, IDT)
GB 17625.1-2012 Electromagnetic Compatibility - Limits - Limits for Harmonic Current Emissions (Equipment Input Current ≤ 16A per Phase)(IEC 61000-3-2:2009 Ed.3.2, IDT)
GB/T 17626.2-2006 Electromagnetic Compatibility (EMC) - Testing and Measurement Techniques - Electrostatic Discharge Immunity Test (IEC 61000-4-2:2001, IDT)
GB/T 17626.3-2006 Electromagnetic Compatibility - Testing and Measurement Techniques - Radiated Radio-frequency Electromagnetic Field Immunity Test (IEC 61000-4-3:2002, IDT)
GB/T 17626.4-2008 Electromagnetic Compatibility - Testing and Measurement Techniques - Electrical Fast Transient/Burst Immunity Test (IEC 61000-4-4:2004, IDT)
GB/T 17626.5—2008 Electromagnetic Compatibility - Testing and Measurement Techniques - Surge (Impact) Immunity Test (IEC 61000-4-5:2005, IDT)
GB/T 17626.6-2008 Electromagnetic Compatibility - Testing and Measurement Techniques - Immunity to Conducted Disturbances, Induced by Radio-frequency Fields (IEC 61000-4-6:2006, IDT)
GB/T 17626.11-2008 Electromagnetic Compatibility - Testing and Measurement Techniques - Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests (IEC 61000-4-11:2004, IDT)
GB 50254 Code for Construction and Acceptance of Low-voltage Apparatus - Electric Equipment Installation Engineering
GB/T 50314-2006 Standard for Design of Intelligent Building
3 Terminologies and Definitions
For the purposes of this Standard, the following terminologies and definitions apply.
3.1
Electric Fence Energizer
Device generating pulse current in electric fence system.
3.2
Network Electric Fence Energizer
Electric fence energizer which can provide communication interface.
3.3
Smart Control Keyboard
Which can perform parameter settings, inquiry of alarm and system log and remote control of electric fence energizer, connect such alarm equipment as HLC-DS and entrance guard with electric fence energizer, realize real-time linkage with such systems as video monitoring.
3.4
Electric Fence Front
Composed of metallic conductor, insulator and bracket etc., and generally installed in perimeter of protection area.
3.5
Metal Conductor
Component of electric fence front for transmitting pulse current generated by electronic fence energizer in perimeter of protection area. Its materials may be classified as special alloy wire for electric fence front and metal conduit etc.
3.6
Insulator
Installed at bracket for perpetually supporting metal conductor and insulating metal conductor and bracket.
3.7
Bracket
Support for installation of insulating material and erection of metal conductor.
3.8
High Voltage Insulated Line
Connecting wire equipped with insulation property and the same material as metal conductor for connecting electric fence energizer and electric fence front.
3.9
Alloy Line
Special alloy conductor for electric fence front.
