GB/T 8190.4-2010 Reciprocating internal combustion engines—Exhaust emission measurement—Part 4:Steady-state test cycles for different engine applications
This Part of GB/T 8190 specifies the test cycles for the measurement and the evaluation of gaseous and particulate exhaust emissions from reciprocating internal combustion engines coupled to a dynamometer. With certain restrictions, this Part of GB/T 8190 can also be used for measurements at site. The tests are carried out under steady-state operation using test cycles which are representative of given applications. This Part of GB/T 8190 is applicable to RIC engines for mobile, transportable and stationary use, excluding engines for motor vehicles primarily designed for road use. It may be applied to engines used, e.g. for earthmoving machines, generating sets and for other applications.
For engines used in machinery covered by additional requirements (e.g. occupational health and safety regulations, regulations for power plants) additional test conditions and special evaluation methods may apply.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this Part of GB/T 8190. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 2820.1 Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets — Part 1: Application, Ratings and Performance (GB/T 2820.1-2009, ISO 8528-1:2005, IDT)
GB/T 8190.1-2010 Reciprocating Internal Combustion Engines — Exhaust Emission Measurement — Part 1: Test-bed Measurement of Gaseous and Particulate Exhaust Emissions (ISO 8178-1:2006, IDT)
GB/T 8190.2 Reciprocating Internal Combustion Engines — Exhaust Emission Measurement — Part 2: Measurement of Gaseous and Particulate Exhaust Emissions under Field Conditions (GB/T 8190.2-1999, idt ISO 8178-2:1996)
GB/T 8190.3 Reciprocating Internal Combustion Engines — Exhaust Emission Measurement — Part 3: Definitions and Methods of Measurement of Exhaust Gas Smoke under Steady-state Conditions (GB/T 8190.3-2003, ISO 8178-3:1994, IDT)
GB/T 8190.5 Reciprocating Internal Combustion Engines — Exhaust Emission Measurement — Part 5: Test Fuels (GB/T 8190.5-2005, ISO 8178-5:1997, IDT)
GB/T 8190.6 Reciprocating Internal Combustion Engines — Exhaust Emission Measurement — Part 6: Report of Measuring Results and Test (GB/T 8190.6-2006, ISO 8178-6:2000, IDT)
GB/T 8190.7-2003 Reciprocating Internal Combustion Engines — Exhaust Emission Measurement — Part 7: Engine Family Determination (ISO 8178-7:1996, IDT)
GB/T 8190.8 Reciprocating Internal Combustion Engines — Exhaust Emission Measurement — Part 8: Engine Group Determination (GB/T 8190.8-2003, ISO 8178-8:1996, IDT)
GB/T 21405 Reciprocating Internal Combustion Engines — Determination and Method for the Measurement of Engine Power — Additional Requirements for Exhaust Emission Tests in Accordance with ISO 8178 (GB/T 21405-2008, ISO 14396:2002, IDT)
