This part of GB/T 9106 specifies the specification classification, structural sizes, technical requirements, test methods, inspection rules as well as marking, packaging, transportation and storage of aluminum easy open end and aluminum can (hereinafter referred to as two-piece can).
This part is applicable to the manufacture, circulation, supervision and inspection of unused aluminum easy open ends and aluminum cans containing beer, carbonated and nitrogen-filled beverages, and may be used as a reference for two-piece cans containing other contents.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 4122.4 Packaging terms - Part 4: Materials and containers
GB 4806.1 National food safety standard - Food contact materials and articles - General safety requirements
GB 4806.9 National food safety standard - Food contact metal materials and articles
GB 4806.10 National food safety standard - Food contact painting and coating
GB 4806.11 National food safety standard - Food contact rubber materials and articles
GB 9685 National food safety standard - Standard for use of additives in food contact materials and articles
GB/T 18455 Package recycling marking
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 4122.4 apply.
4 Specifications classification and structural sizes
4.1 Can
4.1.1 The two-piece can is classified into 200 series, 202 series and 206 series according to the type of can mouth. See Table 1 for the main specifications.
GB/T 9106.1-2019 The following standards are cited：
GB/T 9106.1-2019 Cited by the following standards：
