Standard No.:	JB/T 10394.2-2002
Chinese Name:	涂装设备通用技术条件 第2部分：焊接件
English Name:	General technical conditions for painting equipment Part 2:Weldment
Professional Classification:	A29 Material Protection
Professional Classification:	JB Professional Standard - Machinery
Issued by:
Issued on:	2002-12-27
Implemented on:	2003-04-01
Status:	VALID
Language:	English
File Format:	PDF
Word Count:
Price(USD):	please email coc@codeofchina.com for quotation
Delivery:	via email in 1-3 business day

1 Scope

This part specifies technical requirements, testing method, marking, packaging, transport and storage of painting equipment weldment.
This standard is applicable to painting equipment weldment made of carbon steel, common low-alloy structural steel, heat resistant steel and stainless steel in manual or automatic arc welding, gas shielded welding and gas welding.
This standard is not applicable to pressure vessels.

2 Normative References

The following normative documents contain provisions which, through reference in this part of JB/T 10394, constitute provisions of this part. For dated references, subsequent amendments to (excluding correction to), or revisions of, any of these publications are not applicable to this part. However, the parties who enter into agreement according to this part are encouraged to research whether the latest editions of these documents may be applied or not. For undated references, their latest editions are applicable to this part.
GB/T 324-1988 "Welds - Symbolic Representation on Drawings" (eqv ISO 2553: 1984)
GB/T 983-1995 "Stainless Steel Covered Electrodes" (neq ANSI/AWS A5.4: 1992)
GB/T 985-1988 "Basic Forms and Sizes of Weld Grooves for Gas Welding, Manual arc Welding and Gas-shielded Arc Welding"
GB/T 3375 "Welding Terminology"
GB/T 5117-1995 "Carbon Steel Covered Electrodes" (neq ANSI/AWS A5.1: 1991)
GB 50205-1995 "Code for Construction and Acceptance of Steel Structure Engineering"
GB 50236-1998 "Code for Construction and Acceptance of Field Equipment, Industrial Pipe Welding Engineering"
JB/T 5000.3-1998 "Heavy Mechanical General Techniques and Standards - Weldment"

3 Terms and Definitions

For the purpose of this part of JB/T 10394, the terms and definitions established in GB/T 3375 apply.

4 General Requirements

4.1 The weldment shall be manufactured in accordance with design drawing, technology document and this part.
4.2 The painting equipment project construction shall comply with this part and current relevant standards and regulations of the nation.
4.3 The welder engaged in the welding of painting equipment shall be tested and certificated before the operation of welding. The certificate shall be indicated with welding conditions and valid period. The welder shall be reassessed if he or she stops welding for over 6 months.