This Standard specifies technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of pulse-jet bag filters.
This Standard is applicable to pulse-jet bag filters (hereinafter referred to as bag filter).
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to, or revisions (excluding amended content) of, any of these publications do not apply. However, the parties whose enter into agreement according to these specifications are encouraged to research whether the latest editions of these documents are applied or not. For undated references, the latest edition of the normative document referred to applies.
GB/T 699 Quality Carbon Structural Steels
GB/T 700 Carbon Structural Steel (GB/T 700-2006, ISO 630: 1995, NEQ)
GB/T702 Hot-rolled Round and Square Steel Bars - Dimension, Shape, Weight and Tolerance (GB/T 702-2004, ISO 1035.1~1035-2: 1980, MOD)
GB/T 704 Hot-rolled Flats - Dimensions, Shape, Weight and Tolerances (GB/T 704-1988, neq ISO 1035-4: 1982)
GB/T 706 Hot-rolled beam steel - Dimensions, Shape, Weight and Tolerances (GB/T 706-1988, neq FOTC 8239: 1972)
GB/T 707 Hot-rolled Channel Steel - Dimensions, Shape, Weight and Tolerances (GB/T 707-1988, neq FOTC 8240: 1972)
GB/T 912 Hot-rolled Plates and Strips of Carbon Structural Steels and High Strength Low Alloy Structural Steels
GB/T 985-1988 Basic Forms and Sizes of Weld Grooves for Gas Welding Manual Arc Welding and Gas-shielded Arc Welding
GB/T 986-1988 Basic Forms and Sizes of Weld Grooves for Submerged Arc Weld
GB/T 1804-2000 General Tolerances - Tolerances for Linear and Angular Dimensions without Individual Tolerance Indications (eqv ISO 2768-1: 1989)
GB/T 3091 Welded Steel Pipes for Low Pressure Liquid Delivery (GB/T 3091-2001, neq ISO 559: 1991)
GB/T 3274 Hot-rolled Plates and Strips of Carbon Structural Steels and High Strength Low Alloy Structural Steels
GB 4053.1 Safety Specifications for Fixed Steel Vertical Ladders
GB 4053.2 Safety Specifications for Fixed Steel Oblique Ladders
GB 4053.3 Safety Specifications for Fixed Industrial Protective Railings
GB 4053.4 Fixed Steel Industrial Platform
GB 4915 Emission Standard of Air Pollutants for Cement Industry
GB/T 6414 Castings - System of Dimensional Tolerances and Machining Allowances (GB/T 6414-1999, eqv ISO 8062: 1994)
GB/T 8162 Seamless Steel Tubes for Structural Purposes
GB/T 8163 Seamless Steel Tubes for Liquid Service
GB/T 8923 Rust Grades and Preparation Grades of Steel Surfaces Before Application of Paints and Related Products 8923-1988, eqv ISO 8501-1: 1988)
GB/T9439 Grey Iron Castings
GB/T 9787 Hot-rolled Equal-leg Angle Steel - Dimensions, Shape, Weight and Tolerances
GB/T 9788 Hot-rolled Unequal-leg Angle Steel - Dimensions, Shape, Weight and Tolerances
GB/T 12138-1989 Measuring Method for Performance of Bag Filter
GB 13223 Emission Standard of Air Pollutants for Thermal Power Plants
GB 13271 Emission Standard of Air Pollutants for Boilers
GB/T 13306-1991 Plates
GB/T 13384-1992 General Specifications for Packing of Mechanical and Electrical Product
GB 16171 Emission Standard of Air Pollutants for Coke Oven
HJ/T 324-2006 Specifications for Environmental Protection Product - Fabric for Bag House Filters
JB/T 5000.12-1998 Heavy Mechanical General Techniques and Standards - Paint
JB/T 5911-1991 Technical Requirements of Welding Parts of ESP
JB/T 5915-2006 Sequential Type Pulse Jet Controller for Baghouse Filters
JB/T 5916-2004 Electro-magnetic Pulse Jet Valve for Bag-house Filters
JB/T 5917-2006 Bag Cage for Baghouse Filters
JB/T 8471-1996 Technical Requirement and Acceptance Regulation for Bag Filter Erection
JB/T 10191-2000 Bag Filter - Safety Rules - Manifold for Pulse-jet Bag Filter
