This standard specifies the terminologies and definitions, classification, shape and specifications, marks, raw materials, requirements, test methods, inspection rules, markings and certificates, transportation and storage of fiber-cement cable conduit and joint.
This standard is applicable to fiber-cement cable conduit (hereinafter referred to as cable conduit) and joint produced with inorganic mineral fibers, organic synthetic fibers or plant fibers as reinforced materials for protecting electric wires or cables in the fields of electric power, communication and others.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB 175 Portland Cement and Ordinary Portland Cement
GB 748 Sulfate Resistance Portland Cement
GB/T 7019-1997 Test methods for Fiber Cement Products
GB/T 8071 Chrysotile Asbestos
GB/T 14462 Vinylon Cut Fibre
JC/T 574 Sepiolite
JGJ 63 Standard of Water for Concrete Mixing
3 Terminologies and Definitions
For the purposes of this standard, the following terminologies and definitions apply.
3.1
Cable conduit (code: FCP)
Fiber-cement pipe used to protect electric wires or cables in the fields of electric power, communication and others.
3.2
Joint (code: FCJ)
Pipe connectors made of cable conduit materials of the same (or higher) type.
