This standard specifies the classification, technical requirements, test methods, inspection rules, packaging, marking, transportation and storage of patterned glass.
This standard is applicable to patterned glass with single-sided pattern produced by continuous rolling process. It may also serve as a reference for patterned glass with double-sided pattern. Patterned glass is used for lighting doors and windows, decoration and household items of various buildings and structures.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest editions apply.
GB/T 1217-1986 Gear tooth micrometers
GB/T 2828-1987 Sampling procedures and tables for lot-by-lot inspection by attributes (Apply to inspection of successive lots or batches)
GB/T 6382.1 Flat glass container - Frame-type container and its test method
GB/T 6382.2 Flat glass container - Box-type container and its test method
GB/T 8170-1987 Rules for rounding off of numerical values
GB/T 9056-1988 Steel rulers (neq ISO 5466:1980 )
JC/T 513 Wooden case packaging for plate glass
JB/T 7979-1995 Feeler gauges
3 Definitions
For the purposes of this standard, the following definitions apply.
3.1
pattern unclearness
partial pattern is unclear or deformed
3.2
line
linear stripe defect on the surface of patterned glass
