This standard specifies the terms and definitions, classification and designation, technical requirements, test methods, inspection rules, marking, packaging and storage of adhesive for wallpaper (hereinafter referred to as wallpaper adhesive) and primer for wallpaper adhesive (hereinafter referred to as wallpaper primer).
This standard is applicable to water-based adhesives for indoor wallpaper bonding (referred to as wallpaper adhesive) and supporting wallpaper adhesive primer (referred to as wallpaper primer).
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 451.2 Paper and board—Determination of grammage
GB/T 1741 Test method for determining the resistance of paints film to mold
GB/T 2793 Test method for nonvolatile content of adhesives
GB/T 4851-2014 Measurement of static shear adhesion for adhesive types
GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values
GB/T 9271-2008 Paints and varnishes—Standard panels for testing
GB 11614 Flat glass
GB/T 14518 Determination of the pH of adhesives
GB 18582-2008 Indoor decorating and refurbishing materials—Limit of harmful substances of interior architectural coatings
GB 18583-2008 Indoor decorating and refurbishing materials—Limit of harmful substances of adhesives
JC/T 412.1-2006 Fiber cement flat sheets—Part 1: Non-asbestos fiber cement flat sheets
JG/T 210-2007 Primer for interior and exterior wall
QB/T 4034 Wallpaper
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
wallpaper primer
water-based material coated on the substrate to prevent excessive absorption of wallpaper adhesive due to the porosity of the substrate and adverse effects on wallpaper adhesive or wallpaper caused by extract at bottom layer
3.2
wet clay
initial adhesion of the adhesive to the adhered substrate when the adhesive layer is in a wet state
3.3
the paper web
one side of paper affixed to the paper machine's copper mesh (i.e. the reverse side), while the other side is the non-web side (i.e. the front side)
