This standard specifies the product classification, requirements, test methods, inspection rules as well as marking, packaging, transportation and storage of shower panel.
It is applicable to the shower panel for sanitary fixtures installed in washroom (lavatory, bathroom) and shower room, etc. under the nominal pressure up to 1.0MPa and water temperature up to 90℃.
It is not applicable to the shower panel with heating device.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB/T 191 Packaging - Pictorial marking for handling of goods
GB/T 2828.1-2003 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB 4706.1 Household and similar electrical appliances - Safety - General requirements
GB 5237.1-2004 Wrought aluminium alloy extruded profiles for architecture - Part 1: Untreated profiles
GB 5237.2-2004 Wrought aluminium alloy extruded profiles for architecture - Part 2: Anodized colored profiles
GB 5237.4-2004 Wrought aluminium alloy extruded profiles for architecture - Part 4: Powder coating profiles
GB 9962-1996 Laminated glass
GB 15763.2-2005 Safety glazing materials in building - Part 2: Tempered glass
GB/T 23448-2009 Flexible hose for sanitary tapware
QB 1334-2004 Universal technical terms for faucets
3 Terms and definitions
For the purposes of this standard, the following terms and definitions apply.
