This standard specifies the terms and definitions, classification and designation, service conditions, materials, accessories, technical requirements, test methods, inspection rules, and marking, packaging, transportation and storage of touch-sensitive faucets.
This standard is applicable to touch-sensitive faucets installed at the ends of cold and hot water supply pipelines in buildings, with working pressure (static pressure) not greater than 0.6MPa and water supply temperature of 5~90℃.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.
GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1: 1999, IDT)
GB 4208-2008 Degrees of protection provided by enclosure (IP code) (IEC 60529: 2001, IDT)
GB 4343.1 Electromagnetic compatibility - Requirements for household appliances electric tools and similar apparatus - Part 1: Emission (CISPR 14-1: 2005, IDT)
GB 4343.2 Electromagnetic compatibility - Requirements for household appliances electric tools and similar apparatus - Part 2: Immunity (CISPR 14-2(Ed.1.2): 2008, IDT)
GB 4706.1 Household and similar electrical appliances - Safety - Part 1: General requirements (IEC 60335-1: 2004 (Ed4.1), IDT)
GB/T 5270-2005 Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion (ISO 2819: 1980, IDT)
GB/T 6461-2002 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests (ISO 10289: 1999, IDT)
GB/T 7306.1 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads - Part 1: Parallel internal and taper external threads (GB 7306.1-2000, eqv ISO 7-1: 1994)
GB/T 7306.2 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads - Part 2: Taper internal and external threads (GB 7306.2-2000, eqv ISO 7-1: 1994)
GB/T 7307 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads (GB 7307-2001, eqv ISO 228-1: 1994)
GB/T 9286-1998 Paints and varnishes - Cross cut test for films (eqv ISO 2409: 1992)
GB/T 10125-2012 Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227: 2006, IDT)
GB 14536.9 Automatic electrical controls for household and similar use - Particular requirements for electrically operated water valves including mechanical requirements (IEC 60730-2-8: 2003, IDT)
GB 18145-2014 Ceramic cartridge faucets
GB/T 23447 Shower outlets for bathing
GB/T 23448 Sanitary ware - Flexible hose
QB/T 1334-2013 General technical specifications for faucets
JC/T 932 Drainage fittings for sanitary wares
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
touch-sensitive faucet
faucet realizing the user’s requirements (such as control of water outlet, flow, temperature, water direction, etc.) through touching the faucet or a part of it directly, or touching the screen or key directly according to the information of the touch screen device (hereinafter referred to as "faucet")
